Cara Mengirim Folder/File melalui Kabel UTP (LAN)

Introduction

This tutorial will guide you through the process of sharing files or folders between two computers using a LAN (Local Area Network) cable, specifically a UTP (Unshielded Twisted Pair) cable. This method is effective for quick file transfers without needing an internet connection, making it ideal for local setups.

Step 1: Prepare the Equipment

• Ensure you have two computers available.
• Obtain a UTP LAN cable. A crossover cable is preferred if you are connecting two computers directly.
• Check that both computers have network adapters and are powered on.

Step 2: Connect the Computers

• Plug one end of the UTP cable into the network port of the first computer.
• Plug the other end into the network port of the second computer.
• Wait for the systems to recognize the connection, which may take a few moments.

Step 3: Configure Network Settings

• On each computer, go to Control Panel.
• Select Network and Sharing Center.
• Click on Change adapter settings.
• Right-click on the Ethernet connection (the one connected via the UTP cable) and select Properties.
• Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.
• Select Use the following IP address and enter the following settings:
  • For Computer 1:
    • IP Address: 192.168.1.1
    • Subnet Mask: 255.255.255.0
  • For Computer 2:
    • IP Address: 192.168.1.2
    • Subnet Mask: 255.255.255.0
• Click OK to save the settings.

Step 4: Share the Folder or File

• On the computer that contains the folder or file you want to share:
  • Navigate to the folder or file.
  • Right-click and select Properties.
  • Go to the Sharing tab.
  • Click on Share....
  • Choose the user (or select “Everyone” for broader access) and click Add.
  • Set permissions as desired (Read or Read/Write).
  • Click Share and then Done.

Step 5: Access the Shared Folder or File

• On the second computer:
  • Open File Explorer.
  • In the address bar, type \\192.168.1.1 (replace with the IP of the first computer) and press Enter.
  • You should see the shared folder or file listed.
  • Double-click to access it.

Step 6: Troubleshooting Common Issues

• If you cannot see the shared folder:
  • Ensure both computers are on the same network and configured correctly.
  • Check that file sharing is enabled in the network settings.
  • Disable any firewall temporarily to see if it is blocking the connection.

Conclusion

You have successfully shared files or folders between two computers using a UTP LAN cable. This method is straightforward and allows for efficient file transfers. For next steps, consider exploring advanced sharing settings or integrating additional devices into your network.