Vidange et changement du filtre à huile Fabia 2 1.6 TDI 🛢

Introduction

In this tutorial, we will guide you through the process of changing the oil and oil filter in a Skoda Fabia 2 1.6 TDI. Regular oil changes are crucial for maintaining the performance and longevity of your vehicle. This step-by-step guide will provide you with the essential tools, parts, and instructions needed for this maintenance task.

Step 1: Gather Necessary Tools and Parts

Before starting, ensure you have the following tools and parts ready:

Tools Required

• Douille de 32 (32 mm socket)
• Douille Torx 27 (Torx socket)
• Cliquet + rallonge (Ratchet and extension)
• Cliquet (Ratchet)
• Clé dynamométrique (Torque wrench)
• Petit tournevis plat (Small flat screwdriver)
• Verre doseur (Measuring cup, optional)
• Chiffon (Cloth)
• Bac de récupération (Oil catch pan)
• Douille de 19 (19 mm socket)
• Entonnoir (Funnel, optional)
• Cric hydraulique (Hydraulic jack)
• Chandelles (Jack stands)
• Taquet de bois (Wood block)

Parts Required

• Oil filter
• Engine oil (5W30 recommended)
• Drain plug gasket

Tips

• Make sure to work when the engine is cool to avoid burns.
• Use a clean workspace to prevent contamination.

Step 2: Drain the Old Oil

1. Lift the Car: Use the hydraulic jack to lift the vehicle and secure it with jack stands.
2. Locate the Drain Plug: Find the oil drain plug under the car.
3. Position the Catch Pan: Place the oil catch pan beneath the drain plug.
4. Remove the Drain Plug: Use the 19 mm socket to unscrew the drain plug. Allow the old oil to fully drain into the pan.
5. Replace the Drain Plug: Once drained, securely screw the drain plug back in with a new gasket.

Step 3: Remove the Old Oil Filter

1. Locate the Oil Filter: Find the oil filter, which is usually located near the oil pan.
2. Unscrew the Oil Filter: Use the 32 mm socket to carefully unscrew the oil filter. Be cautious as some oil may still be in the filter.
3. Clean the Area: Wipe the area around the oil filter mount to ensure a clean surface for the new filter.

Step 4: Install the New Oil Filter

1. Prepare the New Filter: Apply a small amount of new oil to the rubber seal of the new oil filter.
2. Screw in the New Filter: Hand-tighten the new oil filter onto the mount. A firm hand-tightening is sufficient.

Step 5: Add New Oil

1. Locate the Oil Filler Cap: Open the hood and find the oil filler cap.
2. Pour in New Oil: Using a funnel, pour the recommended amount of new engine oil into the engine.
3. Check the Oil Level: After adding oil, wait a moment, then use the dipstick to check the oil level. Make sure it is within the recommended range.

Step 6: Final Checks

1. Start the Engine: Turn on the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.
2. Check Oil Level Again: After running the engine, recheck the oil level with the dipstick and add oil if necessary.

Conclusion

You have successfully changed the oil and oil filter in your Skoda Fabia 2 1.6 TDI. Regular maintenance like this is essential for keeping your car running smoothly. For future maintenance tasks, consider exploring more tutorials or checking out resources for selecting the right engine oil. Always remember to dispose of the old oil and filter properly at a recycling center. Happy driving!