Shelly Plus 1 - Installation video

Introduction

This tutorial provides a step-by-step guide on installing the Shelly Plus 1 smart switch, which allows you to control various home appliances remotely. The Shelly Plus 1 is a versatile device designed for easy integration into your smart home system, enabling automation for lights, garage doors, and more. With a straightforward installation process, you can enhance your home automation in under 10 minutes.

Step 1: Gather Required Tools and Materials

Before you start the installation, ensure you have the following tools and materials ready:

• Shelly Plus 1 device
• Screwdriver
• Wire strippers
• Electrical tape
• Optional: Multimeter for testing voltage

Step 2: Turn Off Power Supply

Safety is crucial when working with electrical devices. Follow these steps:

1. Locate the circuit breaker that controls the power supply to the switch you will be working on.
2. Turn off the power to avoid any electrical hazards.
3. Use a multimeter to confirm that the power is off.

Step 3: Remove the Existing Switch

Carefully remove the existing switch from the wall. Follow these sub-steps:

1. Unscrew the switch plate and the switch itself.
2. Gently pull the switch out from the wall box.
3. Take note of the wire connections for reference.

Step 4: Connect the Shelly Plus 1

Now, it’s time to wire the Shelly Plus 1. Follow these connections:

1. Identify the input and output terminals on the Shelly Plus 1.
2. Connect the line (L) wire from your electrical supply to the L terminal on the Shelly.
3. Connect the load (L1) wire from the switch to the L1 terminal on the Shelly.
4. If applicable, connect the neutral (N) wire to the N terminal.
5. Ensure all connections are secure and use electrical tape to cover any exposed wire.

Step 5: Insert the Shelly Plus 1 into the Wall Box

Once wired correctly, place the Shelly Plus 1 back into the wall box:

1. Carefully tuck the wires into the box to avoid pinching.
2. Secure the device in place with screws.
3. Reattach the switch plate.

Step 6: Restore Power Supply

After ensuring everything is properly connected, follow these steps:

1. Go back to the circuit breaker.
2. Turn the power back on.
3. Check if the Shelly Plus 1 is receiving power by observing the LED indicator.

Step 7: Configure the Shelly Plus 1 in the Shelly Smart Control Application

To control your Shelly Plus 1, it must be set up in the app:

1. Download the Shelly Smart Control application from your device’s app store.
2. Open the app and create an account or log in.
3. Follow the in-app instructions to add a new device.
4. Connect the Shelly Plus 1 to your WiFi network by selecting it from the available devices.
5. Assign a name and customize settings as needed.

Conclusion

You have now successfully installed and configured your Shelly Plus 1 smart switch. This device can help automate various appliances, making your home smarter and more efficient. For further customization, explore different automation settings in the Shelly Smart Control App. Enjoy the convenience of controlling your devices from anywhere!