How to Change Brake Pads 2015 Honda CR-V

Introduction

This tutorial provides step-by-step instructions on how to change the brake pads on a 2015 Honda CR-V. Regularly replacing brake pads is essential for maintaining vehicle safety and performance. Following this guide will help you complete the task efficiently and effectively.

Step 1: Gather Necessary Tools and Materials

Before starting, make sure you have everything you need:

• Brake pads (Front: Bendix Premium Copper Free CFC914, Rear: Bendix Premium Copper Free CFC1086)
• Jack and jack stands
• Lug wrench
• C-Clamp or brake pad tool
• Ratchet and socket set
• Brake cleaner
• Rags or paper towels

Practical Tips

• Ensure your vehicle is parked on a flat surface.
• Always wear safety glasses and gloves.

Step 2: Lift the Vehicle

1. Use the lug wrench to slightly loosen the lug nuts on the wheels.
2. Position the jack under the vehicle's jack points.
3. Lift the vehicle until it's high enough for you to work comfortably.
4. Place jack stands under the vehicle for safety and lower the jack.

Step 3: Remove the Wheels

1. Fully remove the loosened lug nuts and take off the wheels.
2. Set the wheels aside in a safe location.

Step 4: Remove the Old Brake Pads

1. Locate the brake caliper. It’s typically held in place by two bolts.
2. Use a ratchet and socket to remove the caliper bolts.
3. Carefully slide the caliper off the brake rotor. Do not let it hang by the brake line.
4. Remove the old brake pads from the caliper bracket. They may slide out easily.

Common Pitfalls

• Avoid pulling on the brake line as it can cause damage.

Step 5: Install the New Brake Pads

1. Apply a thin layer of brake cleaner to the new pads and wipe them down.
2. Slide the new brake pads into the caliper bracket.
3. Check that they are positioned correctly and secure.

Step 6: Compress the Caliper Piston

1. Use a C-Clamp or brake pad tool to compress the caliper piston back into its housing.
2. Place the clamp over the caliper and against the old brake pad (if reusing) to push the piston in slowly.

Important Note

• Ensure the brake fluid reservoir cap is open to prevent pressure buildup.

Step 7: Reattach the Caliper

1. Carefully slide the caliper back over the new brake pads.
2. Align the caliper holes with the bracket and insert the caliper bolts.
3. Tighten the bolts securely.

Step 8: Reinstall the Wheels

1. Place the wheel back onto the hub.
2. Hand-tighten the lug nuts to secure the wheel.
3. Repeat this process for all wheels you are servicing.

Step 9: Lower the Vehicle

1. Use the jack to lift the vehicle slightly and remove the jack stands.
2. Lower the vehicle to the ground and then fully tighten the lug nuts in a star pattern for even pressure.

Conclusion

You have successfully changed the brake pads on your 2015 Honda CR-V. Regularly checking and replacing brake pads is crucial for safe driving. If you're comfortable, consider performing this maintenance task at regular intervals. If you encounter any issues or feel uncertain at any step, consult a professional mechanic. Happy driving!