Creality Ender 3- Easy Way To Level Your Bed

Introduction

This tutorial will guide you through an easy method to level the bed of your Creality Ender 3 or similar 3D printers. Proper bed leveling is crucial for successful prints, ensuring that the nozzle is the correct distance from the print surface. By using specific GCode files, you can simplify the leveling process and prepare your printer for optimal performance.

Step 1: Download Necessary Files

Before starting the leveling process, you need to download two GCode files that will assist you.

1. Download the GCode files:

   • Use this link to access the files: Download GCode Files.
   • Ensure you have both files, as one is for positioning the nozzle and the other is a test print.

2. Prepare your printer:

   • Ensure your Ender 3 is connected to your computer or has a microSD card ready to receive the files.

Step 2: Position the Nozzle Above Adjustment Screws

The first GCode file will help you position the nozzle accurately above the bed's adjustment screws.

1. Load the first GCode file into your printer.
2. Start the print: This will move the nozzle to each corner of the bed.

Adjust the bed level

• At each corner, you will find adjustment screws.
• Ensure the nozzle is just touching a piece of paper placed on the bed. You should feel slight resistance when moving the paper.

Step 3: Test Print for Live Adjustments

Now that the nozzle is positioned, you will use the second GCode file to perform a test print.

1. Load the second GCode file into your printer.
2. Start the test print: This will print a small object that allows you to check the first layer adhesion.

Observe the print

• If the filament is not adhering well, adjust the bed level slightly using the screws.
• Repeat this process until you achieve a good first layer adhesion.

Step 4: Finalize Bed Leveling

After the test print, finalize your bed leveling.

1. Make any final adjustments to the screws based on the print results.
2. Run another test print if necessary to confirm that the bed is level.
3. Check for consistent adhesion across all corners of the bed.

Conclusion

Congratulations! You have successfully leveled the bed of your Creality Ender 3. Proper bed leveling is vital for achieving high-quality prints. If you encounter any issues, consider rechecking the leveling process or adjusting your printer's settings. For further enhancements, explore additional tools and profiles available for your printer to optimize your printing experience. Happy printing!