Cara Merakit PC & Instalasi Windows! FULL STEP BY STEP!

Introduction

This tutorial provides a comprehensive guide on assembling a PC and installing Windows, based on the video by ochaxt. Whether you're building your first computer or looking to upgrade, this step-by-step guide will help you navigate through the process with ease.

Step 1: Gather Your Components

Before starting your build, ensure you have all necessary components:

• CPU: Ryzen 5 5600X
• Motherboard: MSI B550
• RAM: V-Color
• Storage: Corsair MP600 (SSD M.2)
• GPU: MSI RTX 3060
• Power Supply: NZXT C550 Bronze
• Case: Fractal Design Pop Air
• Cooling: Fractal Lumen S24

Tips:

• Check compatibility of components before purchasing.
• Use a PSU calculator to determine power requirements.

Step 2: Prepare the Motherboard

1. Open the motherboard box and place it on a non-static surface.

2. Install the CPU:

   • Align the CPU with the socket, ensuring the notches match.
   • Gently lower it into place and secure the lever.

3. Install the RAM:

   • Open the RAM slots by pushing the clips down.
   • Align the RAM stick with the slot and press down until it clicks.

4. Install the SSD M.2:

   • Locate the M.2 slot on the motherboard.
   • Insert the SSD at an angle and secure it with the screw.

Step 3: Install the Stock Cooler

1. Remove the protective film from the cooler.
2. Apply thermal paste if not pre-applied.
3. Align the cooler with the CPU and secure it with the screws.

Step 4: Prepare the Case

1. Open the case and remove side panels.
2. Install the motherboard standoffs according to your motherboard's layout.
3. Place the motherboard into the case, aligning it with the standoffs, and secure it with screws.

Step 5: Install the AIO Cooler

1. Position the radiator at the top or front of the case.
2. Connect the fans to the radiator and secure them in place.
3. Connect the AIO cooler’s pump to the CPU header on the motherboard.

Step 6: Install the Power Supply

1. Place the power supply (PSU) into its designated area in the case.
2. Secure it with screws.
3. Route the cables through the cable management holes for a clean setup.

Step 7: Connect Storage Drives

1. If using additional hard drives:
   • Install them in their designated bays.
   • Connect SATA cables to the motherboard and power cables from the PSU.

Step 8: Install the GPU

1. Locate the PCIe slot on the motherboard.
2. Insert the GPU into the slot and secure it with screws.
3. Connect the power cables from the PSU to the GPU.

Step 9: Perform Initial Tests

1. Connect the monitor, keyboard, and mouse.
2. Power on the PC to ensure all components are functioning correctly.
3. Check BIOS to verify component recognition.

Step 10: Install Windows

1. Download Windows 10 or 11 from the official Microsoft website.
2. Create a bootable USB drive using the downloaded ISO.
3. Boot from the USB drive and follow the installation prompts.
4. Partition your SSD as needed and complete the installation.

Conclusion

Congratulations on successfully assembling your PC and installing Windows! Remember to regularly update your drivers and operating system for optimal performance. Feel free to explore additional software and applications to enhance your computing experience. For troubleshooting, refer to the provided troubleshooting guide link for assistance.