2011-2016 Hyundai Elantra Headlight Bulb Replacement | How To / DIY

Introduction

This tutorial will guide you through the process of replacing the headlight bulb in a 2011-2016 Hyundai Elantra. Whether you're dealing with a burned-out bulb or simply upgrading for better visibility, this DIY project is straightforward and can be completed with minimal tools.

Step 1: Gather Necessary Tools and Materials

Before you begin, ensure you have the following tools and materials ready:

• New headlight bulb (check your vehicle manual for the correct type)
• Gloves (to prevent oil from your skin getting on the bulb)
• Screwdriver (typically a flathead or Phillips, depending on your car's screws)

Step 2: Open the Hood

• Locate the hood release lever inside your vehicle, usually found near the driver's side.
• Pull the lever to release the hood.
• Go to the front of the car, lift the hood, and secure it with the prop rod.

Step 3: Remove the Headlight Assembly

• Identify the headlight assembly you need to access.
• Locate the screws or clips holding the assembly in place.
• Use your screwdriver to remove these screws or clips carefully.
• Gently pull the headlight assembly out from its housing.

Step 4: Disconnect the Bulb

• On the rear side of the headlight assembly, find the bulb socket.
• Twist the bulb socket counterclockwise to release it from the assembly.
• Pull the bulb straight out from the socket.

Step 5: Install the New Bulb

• Take your new bulb and handle it with gloves to avoid touching the glass.
• Insert the new bulb into the socket until it fits snugly.
• Twist the socket clockwise to secure it back into the headlight assembly.

Step 6: Reattach the Headlight Assembly

• Align the headlight assembly back into its housing.
• Replace the screws or clips you removed earlier to secure the assembly in place.
• Ensure everything is tightened properly to avoid any rattling or movement.

Step 7: Test the New Headlight

• Before closing the hood, turn on your vehicle and test the new headlight to ensure it’s functioning properly.
• If it does not light up, double-check the connections and the bulb installation.

Conclusion

Replacing the headlight bulb in your Hyundai Elantra is a simple task that can enhance your driving visibility and safety. Remember to use gloves when handling the new bulb and to check your vehicle’s manual for specific bulb types. If you need to replace more than one bulb, follow the same steps for each headlight. Happy driving!