Réparation Caméra avant iPhone 11 Pro

Introduction

In this tutorial, you will learn how to replace the front camera of your iPhone 11 Pro. The TrueDepth camera not only enables FaceTime but also powers Animoji and Memoji features. If your camera has stopped working due to a drop or other damage, this guide will help you perform the repair yourself in approximately 30 minutes.

Step 1: Gather Necessary Tools and Parts

Before starting the repair, make sure you have everything you need:

• Replacement front camera for iPhone 11 Pro
• Adhesive for screen (specific to iPhone 11 Pro)
• Professional tool kit (including screwdrivers, prying tools, etc.)
• Magnetic screw holder to keep track of screws

You can find the necessary parts at the following links:

• Front Camera
• Screen Adhesive
• Professional Tool Kit
• Magnetic Screw Holder

Step 2: Power Off Your iPhone

Before starting any repair, ensure that your device is powered off to prevent any electrical damage or short circuits.

• Press and hold the side button and either volume button until the power off slider appears.
• Slide to power off the device.

Step 3: Remove the Screen

To access the front camera, you will need to remove the screen.

1. Use a heat gun or hairdryer to gently heat the edges of your iPhone to soften the adhesive.
2. Insert a plastic prying tool between the screen and the body of the iPhone to create a gap.
3. Slowly work your way around the edges, carefully prying the screen away without damaging it.
4. Once you have loosened the screen, lift it gently and disconnect the battery for safety.

Step 4: Disconnect the Front Camera

With the screen removed, locate the connectors for the front camera.

1. Remove any screws securing the front camera connector using your precision screwdriver.
2. Gently lift the connector using a plastic tool to avoid damaging the motherboard.
3. Take out the old front camera.

Step 5: Install the New Front Camera

Now, it’s time to install the new camera.

1. Place the new front camera in the same position as the old one.
2. Carefully connect the camera’s connector to the motherboard.
3. Secure it with the screws you previously removed.

Step 6: Reattach the Screen

After the new camera is installed, reattach the screen.

1. Reconnect the battery before sealing the screen back.
2. Align the screen with the body of the phone.
3. Firmly press down around the edges to secure it back in place, ensuring the adhesive sticks.

Step 7: Power On and Test

Once you have reattached the screen:

• Power on your iPhone by pressing the side button.
• Open the camera app and switch to the front camera to test its functionality.

Conclusion

Congratulations! You have successfully replaced the front camera of your iPhone 11 Pro. Remember to keep your tools organized and handle all components carefully to avoid damage. If you encounter any issues during the repair, consider joining the community at Atelier du Mobile for support and advice. Happy repairing!