SABLON KAOS MANUAL PRAKTIS DARI AWAL HINGGA AKHIR DIJAMIN BISA

Introduction

This tutorial provides a comprehensive guide to manual screen printing, tailored for beginners. It covers everything from preparation to the final printing process, ensuring that anyone can learn and succeed in creating their own custom designs.

Step 1: Gather Your Materials

To start with screen printing, you will need the following materials:

• Screen printing frame
• Mesh screen
• Squeegee
• Emulsion and sensitizer
• Ink (fabric ink recommended)
• Transparency film for designs
• A light source for exposing the screen
• A washout station (can be a sink or hose)
• T-shirt or fabric to print on

Tips for Material Selection

• Choose a mesh screen appropriate for the type of design you want to print. A finer mesh is better for detailed designs.
• Ensure that the inks used are suitable for fabric to achieve durability.

Step 2: Prepare Your Design

• Create your design on a computer using graphic design software.
• Print the design onto transparency film. Make sure it is opaque enough to block light during exposure.

Common Pitfalls

• Avoid using low-quality transparency film, as this can result in poor exposure and unclear prints.

Step 3: Coat the Screen with Emulsion

• Mix the emulsion and sensitizer according to the instructions.
• Using a squeegee, evenly coat both sides of the screen with the emulsion mixture.
• Allow the screen to dry in a dark, dust-free environment.

Practical Advice

• Ensure that the emulsion is applied evenly to avoid inconsistencies in the print.

Step 4: Expose the Screen

• Place the dried screen in a light exposure unit or under a strong light source.
• Position the transparency film with your design on top of the screen.
• Expose the screen for the recommended time based on your emulsion type.

Important Note

• The exposure time can vary based on the light source used; refer to your emulsion's guidelines for exact timing.

Step 5: Wash Out the Screen

• After exposure, rinse the screen with water to wash out the unexposed emulsion.
• Use a gentle spray to avoid damaging the mesh.

Tips for Effective Washing

• Ensure that the water is not too hot, as this can affect the emulsion.

Step 6: Set Up for Printing

• Place your t-shirt or fabric on a flat surface.
• Position the screen over the fabric, ensuring it is aligned correctly.

Step 7: Print Your Design

• Pour a line of ink at the top of the screen.
• Use the squeegee to pull the ink down across the design in a single smooth motion.
• Repeat as necessary, applying more ink if needed.

Printing Tips

• Practice consistent pressure on the squeegee to achieve an even print.

Step 8: Cure the Ink

• Allow the printed fabric to dry.
• Cure the ink by either heat-setting it with an iron or using a heat press to ensure durability.

Conclusion

You've successfully completed the manual screen printing process! Remember to practice your technique for better results. If you're interested in purchasing materials or need further assistance, feel free to contact Unik SablonQu. Happy printing!