TUTORIAL MEMBANGUN VoIP Server MENGGUNAKAN BRIKER 2.1.1 DI VBOX

Introduction

This tutorial provides a comprehensive guide to building a VoIP server using Briker OS 2.1.1 in VirtualBox. You'll learn how to set up the server, configure it for VoIP functionality, and install necessary softphone applications. This guide is ideal for users looking to implement a VoIP solution for personal or business use.

Step 1: Download Required Software

Before starting the installation, download the necessary files.

1. Briker OS 2.1.1

   • Download from: Briker OS 2.1.1

2. Softphone Applications

   • Zoiper5: Download Zoiper5
   • Microsip: Download Microsip

Step 2: Install VirtualBox

1. Download and install VirtualBox from the official website.
2. Open VirtualBox once the installation is complete.

Step 3: Create a New Virtual Machine

1. Click on "New" to create a new virtual machine.
2. Name your VM (e.g., "VoIP Server").
3. Set the type to "Linux" and version to "Other Linux (64-bit)".
4. Allocate at least 1 GB of RAM (more if available).
5. Create a virtual hard disk (VDI) with at least 10 GB of space.

Step 4: Configure the Virtual Machine

1. Select the created VM and click on "Settings".
2. Go to the "Storage" section.
3. Under "Controller: IDE", click on the empty disk icon, and then on the disk icon on the right to choose "Choose a disk file...".
4. Select the downloaded Briker OS 2.1.1 ISO file.

Step 5: Start the Virtual Machine

1. Start your VM by clicking on "Start".
2. Follow the on-screen instructions to install Briker OS.
3. Complete the installation and set up your initial configuration (user name, password, etc.).

Step 6: Configure VoIP Settings

1. Once the OS is installed, log in to the Briker OS environment.

2. Open the terminal to configure VoIP settings.

3. Use the following commands to set up your VoIP configuration (adjust as necessary for your network):

   sudo nano /etc/voip.conf
   

   • Edit the configuration file to set up your SIP settings.

4. Save and exit the configuration file.

Step 7: Install and Configure Softphones

1. Install Zoiper5 or Microsip on your client machine.
2. Open the softphone application and input the SIP settings:
   • SIP server: Your VoIP server's IP address
   • Username and password: The credentials you set during VoIP configuration.

Step 8: Test the VoIP Server

1. Make a test call from the softphone application to ensure everything is working correctly.
2. Check network settings and firewall rules if you encounter issues.

Conclusion

You have successfully built and configured a VoIP server using Briker OS in VirtualBox. Make sure to customize and secure your server according to your needs. For further exploration, consider experimenting with additional features or integrating other VoIP services. Happy calling!