Honda Element Fixes and Upgrades

Introduction

This tutorial provides a comprehensive guide to various repairs and upgrades for the 2005 Honda Element as demonstrated by EricTheCarGuy. Whether you're looking to enhance your vehicle's functionality or address specific repairs, this guide will walk you through each step with practical advice and tips.

Step 1: Replace Instrument Cluster Lights

• Gather necessary bulbs:
  • Black Gauge Lights: 35505-SCV-A01
  • Grey Gauge Lights: 35505-SCV-A11
  • Dial Bulbs: 79629-SV3-A01
  • Switch Bulbs: 79629-SCV-A01
• Remove the instrument cluster cover.
• Unscrew the cluster and gently pull it out.
• Replace the old bulbs with the new ones.
• Reassemble the cluster and test the lights.

Step 2: Change Center Console Lights

• Access the center console by removing any screws or fasteners.
• Carefully detach the console cover.
• Locate and replace the bulbs as you did in Step 1.
• Reattach the console cover and secure it with screws.

Step 3: Repair Door Latch

• Remove the door panel by unscrewing any fasteners.
• Disconnect any electrical connectors.
• Inspect the latch mechanism and clean any debris.
• Reassemble the door panel and test the latch.

Step 4: Replace Driver's Seat Belt Buckle

• Remove the seat from the vehicle for easier access.
• Disconnect the seat belt buckle wiring.
• Replace the old buckle with a new one.
• Reinstall the seat and connect the wiring.

Step 5: Install Rear Door Seal

• Remove the old door seal by peeling it away.
• Clean the surface to ensure proper adhesion.
• Apply the new seal, pressing firmly to secure it in place.

Step 6: Change Speakers

• Remove the speaker grilles and unscrew the old speakers.
• Disconnect the wiring harness.
• Connect the new speakers (Kicker CSC65) using speaker pig tails (72-780).
• Secure the speakers and replace the grilles.

Step 7: Install Hatch Struts

• Support the hatch with a prop.
• Remove the old struts by unscrewing or unclipping them.
• Attach the new hatch struts and ensure they are secure.

Step 8: Replace AC Condenser Fan

• Disconnect the battery for safety.
• Remove any covers obstructing access to the fan.
• Unscrew and disconnect the old fan.
• Install the new fan (part number: 38616-P3G-003).
• Reconnect everything and test the fan operation.

Step 9: Change Power Steering Fluid

• Use a fluid extractor for an easy process.
• Locate the power steering reservoir and remove the cap.
• Extract the old fluid and replace it with new fluid.
• Recheck the fluid level after running the engine briefly.

Step 10: Replace Wiper Blades and Rear Insert

• Lift the wipers away from the windshield.
• Remove the old blades and insert.
• Attach the new wiper blades (part number: 76630-SCV-A01) and rear insert (part number: 76622-S50-003).
• Lower the wipers back into position.

Step 11: Change Headlights and Install Fog Lights

• Open the hood and locate the headlight assembly.
• Unscrew the old headlights and replace them (Anzo Headlight part).
• For fog lights, follow the specific installation guide to ensure proper wiring and fit.

Conclusion

By following these steps, you can effectively perform various repairs and upgrades on your Honda Element. Each upgrade enhances the vehicle's functionality and safety. For further guidance or to explore specific replacements in detail, consider watching the associated video or checking out related content. Happy repairing!