DIY Simple Clutch Wallet With Pocket & Card Slots

Introduction

In this tutorial, you'll learn how to create a simple and stylish clutch wallet with pockets and card slots. This DIY project is perfect for those looking to enhance their sewing skills while creating a functional accessory. The materials are easy to find, and the steps are straightforward, making it suitable for both beginners and experienced crafters.

Step 1: Gather Your Materials

Before starting your project, collect all the necessary materials. Here’s what you’ll need:

• Printed Cotton

  • 1 piece of 26.5 x 20 cm (10 1/2" x 7 7/8")
  • 2 pieces of 20 x 23 cm (7 7/8" x 9")
  • 1 piece of 12.5 x 12 cm (5" x 4 3/4")
  • 1 piece of 26 x 4.5 cm (10 1/4" x 1 3/4")

• Cotton (Dot)

  • 1 piece of 26.5 x 20 cm (10 1/2" x 7 7/8")
  • 2 pieces of 7 x 7 cm (2 3/4" x 2 3/4")
  • 8 pieces of 12.5 x 12 cm (5" x 4 3/4")
  • 1 piece of 13 x 20 cm (5 1/8" x 7 7/8")

• Fusible Interfacing

  • 1 piece of 24.5 x 18 cm (9 5/8" x 7 1/8")
  • 1 piece of 5 x 5 cm (2" x 2")
  • 8 pieces of 5.5 x 10.5 cm (2 1/8" x 4 1/8")
  • 1 piece of 10 x 10.5 cm (4" x 4 1/8")

• Zipper

  • 1 zipper size 15-18 cm (6"-7")

• Plastic Snap Buttons

Make sure to have all materials prepped and ready before you start sewing.

Step 2: Cut Your Fabric Pieces

Accurately cut the fabric pieces according to the dimensions listed in Step 1. Use sharp scissors or a rotary cutter for clean edges.

• Tip: Always double-check your measurements before cutting to avoid wasting fabric.

Step 3: Prepare the Interfacing

Apply fusible interfacing to the corresponding fabric pieces for added stability.

• Place the interfacing on the wrong side of the fabric.
• Use an iron to fuse the interfacing to the fabric, following the manufacturer's instructions (typically a medium heat without steam).

Step 4: Assemble the Card Slots

1. Take the 8 pieces of 12.5 x 12 cm (5" x 4 3/4") fabric and fold them in half, wrong sides together, to create card slots.
2. Stitch along the open edge to secure the folds.
3. Attach the card slots to the main body of the wallet as per your design.

Step 5: Create the Zipper Section

1. With the two pieces of 20 x 23 cm (7 7/8" x 9"), place one piece right side up.
2. Position the zipper along the top edge, right side down.
3. Place the second piece on top, right side down, aligning the edges.
4. Stitch along the zipper edge, then flip the fabric over and press.

Step 6: Assemble the Wallet

1. Join the main body pieces and the zipper section together.
2. Ensure all edges are aligned and secure with pins.
3. Sew around the perimeter, leaving a small opening to turn the wallet inside out.

Step 7: Add the Snap Buttons

1. Decide where you want the snap buttons to be placed for closure.
2. Follow the instructions provided with the snap buttons to attach them securely.

Conclusion

Congratulations! You have completed your DIY clutch wallet with pockets and card slots. This stylish accessory can be customized in various fabrics and colors to suit your taste.

Key Takeaways

• Gather materials before starting.
• Accurate cutting and interfacing application are crucial.
• The zipper section is a key part of the wallet's functionality.

Feel free to experiment with different designs and sizes for future wallets. Happy sewing!