Servicing Yamaha's FJ-09, MT-09, Tracer 900 - Oil, chain, air filter, electrical system, etc.!

Introduction

This tutorial will guide you through servicing your Yamaha FJ-09, MT-09, or Tracer 900 motorcycle. Regular maintenance is crucial for safety and performance, and this step-by-step guide will cover essential checks and services, including oil changes, chain maintenance, and electrical system inspections.

Step 1: Check and Change Oil

1. Gather Tools and Materials:

   • Oil filter wrench
   • Socket set
   • New oil filter
   • Engine oil (check manual for specifications)
   • Oil catch pan

2. Drain Old Oil:

   • Warm up the engine slightly to thin the oil.
   • Remove the oil drain plug and allow the old oil to fully drain into the catch pan.

3. Replace Oil Filter:

   • Use the oil filter wrench to remove the old filter.
   • Apply a small amount of new oil to the rubber gasket of the new filter.
   • Install the new filter, ensuring it is snug but not overly tightened.

4. Add New Oil:

   • Replace the drain plug securely.
   • Pour the new oil into the engine using the funnel.
   • Check the oil level using the dipstick and add more oil if necessary.

Step 2: Inspect and Clean the Chain

1. Check Chain Tension:

   • Use a ruler or chain tool to measure the slack.
   • Adjust if necessary according to the manufacturer's specifications.

2. Clean the Chain:

   • Use a chain cleaner and a brush to remove dirt and debris.
   • Wipe the chain with a clean cloth.

3. Lubricate the Chain:

   • Apply a suitable chain lubricant evenly while rotating the wheel.
   • Allow the lubricant to set for a few minutes before riding.

Step 3: Inspect Tires and Brakes

1. Check Tire Pressure:

   • Use a tire pressure gauge to check each tire.
   • Inflate to the recommended pressure found in the owner’s manual.

2. Inspect Tread Depth:

   • Look for any signs of wear or damage.
   • Replace tires if tread depth is below the recommended limit.

3. Check Brake Pads:

   • Inspect the thickness of the brake pads.
   • Replace if they are worn down.

Step 4: Air Filter Replacement

1. Remove the Air Filter Cover:

   • Locate the air filter cover and remove screws or clips.

2. Inspect the Air Filter:

   • Take out the old air filter and check for dirt and damage.
   • Clean the housing with a damp cloth.

3. Install New Air Filter:

   • Place the new air filter into the housing and secure the cover back in place.

Step 5: Check Electrical System

1. Inspect Battery and Connections:

   • Check for corrosion on battery terminals and clean if necessary.
   • Ensure connections are tight.

2. Test Lights and Horn:

   • Turn on the ignition and check that all lights function properly.
   • Test the horn for functionality.

Step 6: Inspect Cooling System

1. Check Coolant Levels:

   • Look at the coolant reservoir and ensure it's filled to the correct level.
   • If low, top off with the appropriate coolant mixture.

2. Inspect Hoses for Leaks:

   • Check hoses for cracks or leaks.
   • Replace any damaged hoses.

Conclusion

Regular servicing of your Yamaha FJ-09, MT-09, or Tracer 900 is essential for safe riding. By following these steps—changing the oil, maintaining the chain, inspecting tires and brakes, replacing the air filter, checking the electrical system, and inspecting the cooling system—you can ensure your motorcycle remains in excellent condition. For ongoing maintenance, consider setting a schedule based on your riding habits and the manufacturer's recommendations. Happy riding!