Ethernet Download Speeds Stuck At 100Mbs?
2 min read
1 month ago
Published on Aug 02, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Introduction
If your Ethernet download speeds are stuck at 100 Mbps while you expect higher speeds, this guide will help you troubleshoot and resolve the issue. By adjusting your network settings, you can potentially unlock the full speed your connection provides.
Step 1: Access Network Settings
- Locate the network icon on your computer.
- Click on it and select "Network and Internet settings."
- In the settings window, find and click on "Change adapter options."
Step 2: Configure Ethernet Properties
- Identify the Ethernet connection you are using (e.g., "Ethernet 1").
- Double-click on the connection to open its properties.
- In the properties window, click on the "Configure" button.
Step 3: Adjust Speed and Duplex Settings
- Navigate to the "Advanced" tab in the configuration window.
- Scroll down to find the "Speed & Duplex" option.
- Check the current setting; it may be capped at 100 Mbps.
- Change the setting to "Auto Negotiation" or select a value higher than 100 Mbps.
- Click "OK" to apply the changes.
Step 4: Test Your Download Speed
- Close all settings windows.
- Run a speed test to check your download speeds.
- You should see an improvement, ideally reaching your expected speeds.
Conclusion
By following these steps, you can adjust your Ethernet settings to enhance your download speeds. If you're still experiencing issues after making these adjustments, consider checking your hardware or consulting with your Internet Service Provider. Remember to regularly test your connection speed to ensure optimal performance.