GE Profile Opal 2.0 Ice Maker - Disassembly and Deep Cleaning (full video)

Introduction

In this tutorial, we will guide you through the process of disassembling and deep cleaning the GE Profile Opal 2.0 Ice Maker. If you’ve noticed mold or algae buildup, particularly at the bottom of the water unit, this step-by-step guide will help you restore your ice maker to a clean and functional state. Regular maintenance can extend the life of your appliance and ensure the quality of the ice it produces.

Step 1: Gather Your Materials

Before you start the disassembly and cleaning process, collect the necessary tools and materials:

• Extra long tube/hose cleaner
• Screwdriver (typically Phillips head)
• Soft cloths or paper towels
• Mild detergent or vinegar solution
• Water
• UV light (for testing cleanliness)

Step 2: Disassemble the Ice Maker

Carefully disassemble the ice maker to access the internal components.

1. Unplug the Ice Maker: Ensure safety by disconnecting the power.
2. Remove the Ice Bin: Take out the bin that holds the ice.
3. Unscrew the Cover: Using a screwdriver, remove screws securing the top cover and gently lift it off.
4. Detach Internal Parts: Identify and disconnect any hoses or wires that may block access to the water reservoir.

Step 3: Inspect the Components

Once disassembled, inspect the internal parts for mold or algae.

• Look for any visible signs of buildup, especially in the water reservoir and hoses.
• Take note of areas that may require extra attention during cleaning.

Step 4: Clean the Reservoir and Hoses

Deep cleaning the water reservoir and hoses is crucial to eliminate mold and ensure proper function.

1. Use the Hose Cleaner: Insert the long tube cleaner into the hoses to remove any blockages or buildup.

Wash the Reservoir

• Use a mixture of mild detergent or vinegar with water.
• Scrub the inside of the reservoir with a soft cloth to remove any residue.
• Rinse thoroughly with clean water to eliminate any cleaning solution.

Step 5: Clean Other Components

In addition to the reservoir, other parts also need cleaning.

• Ice Bin: Wash with soap and water, then rinse and dry completely.
• Exterior Surfaces: Wipe down the outer surfaces with a damp cloth to remove dust and fingerprints.

Step 6: Conduct a UV Light Test

To ensure that all mold or algae have been eliminated, perform a UV light test.

• Shine the UV light inside the cleaned areas.
• Look for any spots that fluoresce, indicating residual bacteria or mold.

Step 7: Reassemble the Ice Maker

Once everything is cleaned and dry, reassemble your ice maker.

1. Reconnect the Internal Parts: Carefully reattach any hoses or wires.
2. Replace the Top Cover: Secure it with screws.
3. Insert the Ice Bin: Place it back into the ice maker.

Step 8: Functional Test

After reassembly, perform a functional test to ensure everything is working correctly.

• Plug the ice maker back in.
• Run a test cycle to check for proper ice production and ensure there are no leaks.

Conclusion

Congratulations on successfully disassembling and deep cleaning your GE Profile Opal 2.0 Ice Maker! Regular maintenance is key to preventing mold growth and ensuring a smooth operation. Consider setting a cleaning schedule every few months to keep your machine in top condition. If you encounter any issues during the reassembly or testing phases, consult the user manual for troubleshooting tips. Happy ice making!