How To Remove / Replace Fog Lights On A 2011-2013 Jeep Grand Cherokee

Introduction

This tutorial will guide you through the process of removing and replacing the fog light bulb on a 2011-2013 Jeep Grand Cherokee. Whether you're dealing with a burnt-out bulb or upgrading your lights, this step-by-step guide will help you complete the task efficiently.

Step 1: Gather Your Tools

Before you begin, collect the necessary tools to make the process smooth:

• Flathead screwdriver
• Pry tool
• 10mm socket wrench (if applicable)

You can purchase a pry tool set here and a new fog light bulb here.

Step 2: Prepare the Vehicle

Ensure safety and ease of access by preparing your vehicle:

• If you do not have a lift, turn your steering wheel fully towards the side of the fog light you will be working on (left for driver’s side, right for passenger’s side).
• This will create space to access the fog light assembly.

Step 3: Remove the Clips and Bolts

To access the fog light, you need to remove several fasteners:

• Locate the clips securing the panel. Use the flathead screwdriver to pry them out.
  • The clips have a top that can be removed with a screwdriver, followed by using the pry tool to extract the bottom part.
• If your vehicle has a 10mm bolt, remove it using the socket wrench.

Step 4: Access the Fog Light Assembly

Once the clips and bolts are removed:

• Carefully pull back the panel to reveal the fog light assembly.
• The fog light will be visible and accessible.

Step 5: Remove the Old Fog Light Bulb

To take out the old bulb:

• Locate the two clips on the side of the fog light assembly.
• Gently press the clips inward to release the bulb. If the clips are old and brittle, they may break, but this is not a concern since you will be replacing the entire assembly.
• Once released, remove the bulb from the socket.

Step 6: Install the New Fog Light Bulb

With the old bulb removed, it’s time to install the new one:

• Take your new fog light bulb and ensure you are wearing gloves to prevent oil from your hands from touching the bulb.
• Align the two prongs on the bulb with the corresponding clips on the assembly.
• Snap the bulb into place, ensuring it is secure.

Step 7: Reassemble the Panel

After installing the new bulb:

• Reposition the panel back into place.
• Secure it by reinserting the clips and any bolts that were removed earlier.

Step 8: Test the New Fog Light

Before considering the job complete:

• Turn on your vehicle's fog lights to ensure the new bulb is functioning correctly.
• If the light does not turn on, double-check the installation.

Conclusion

Replacing the fog light bulb on a 2011-2013 Jeep Grand Cherokee is a straightforward process that can be completed with a few tools and some careful steps. By following this guide, you can ensure your fog lights are in working order, improving visibility during low-light conditions. For more automotive tips and tutorials, consider subscribing to channels dedicated to car maintenance and repairs.