How to install an Integrated Tail Light & Fender Eliminator on a Kawasaki KLX250

Introduction

This tutorial will guide you through the process of installing an Integrated Tail Light and Fender Eliminator on a Kawasaki KLX250. This upgrade not only enhances the aesthetics of your bike but also improves visibility with a sleek LED design. The installation is straightforward and requires no modifications, making it an excellent DIY project for any motorcycle enthusiast.

Step 1: Gather Your Tools and Materials

Before you begin the installation, make sure you have the following tools and materials ready:

• Integrated Tail Light and Fender Eliminator Kit
• Socket wrench set
• Screwdriver set (Phillips and flathead)
• Wire connectors (if necessary)
• Electrical tape
• Zip ties (for cable management)

Tip: Working in a well-lit area with enough space will make the process smoother.

Step 2: Remove the Stock Fender

1. Locate the mounting bolts:
   • Check the rear fender for bolts holding it in place.
2. Use the socket wrench:
   • Remove the bolts carefully. Keep them for potential future use.
3. Unplug the wiring:
   • Disconnect the stock tail light wiring harness. This may involve unclipping or unscrewing it from the fender.

Common Pitfall: Be careful not to damage the wiring harness as you disconnect it; gentle handling will help prevent any accidental breaks.

Step 3: Prepare the New Tail Light

1. Inspect the Integrated Tail Light:
   • Ensure all components are included in your kit.
2. Connect the wiring:
   • Follow the color-coded wiring diagram provided in the kit. Commonly, you will connect:
     • Ground (black)
     • Running light (red)
     • Turn signals (typically green and yellow)
3. Use wire connectors:
   • Securely connect the wires using the provided connectors and wrap with electrical tape for insulation.

Step 4: Install the Integrated Tail Light

1. Position the new tail light:
   • Align it to the existing mounting points on your bike.
2. Secure the tail light:
   • Use the included screws or bolts to fasten the tail light in place.
3. Check the fit:
   • Ensure that the tail light is level and securely attached.

Step 5: Install the Fender Eliminator

1. Attach the plate bracket:
   • Position the bracket where the stock fender was installed.
2. Secure with bolts:
   • Use the provided bolts to fasten the bracket firmly.
3. Re-route wiring:
   • Neatly organize any excess wiring using zip ties to prevent it from getting caught in moving parts.

Step 6: Test the New Setup

1. Power on the bike:
   • Turn on the ignition to check the functionality of the new tail light and turn signals.
2. Check all lights:
   • Ensure the brake light, running light, and turn signals are working properly.

Tip: If any lights are not functioning, double-check your wiring connections to ensure they are secure.

Conclusion

You've successfully installed an Integrated Tail Light and Fender Eliminator on your Kawasaki KLX250! This upgrade gives your bike a modern look while enhancing safety. Enjoy your revamped ride, and consider sharing your experience with other riders. For further enhancements, explore additional accessories that complement your new setup.