Замена передних тормозных дисков и колодок Hyundai ix35 ПОДРОБНАЯ ИНСТРУКЦИЯ

Introduction

This tutorial provides a detailed guide on how to replace the front brake discs and pads on a Hyundai ix35. Proper maintenance of your vehicle's braking system is crucial for safety and performance. This step-by-step guide will help you understand the process and equip you with the necessary skills to carry out the replacement yourself.

Step 1: Gather Necessary Tools and Materials

Before starting, make sure you have the following tools and materials ready:

• New brake discs
• New brake pads
• Socket set
• Wrench set
• Screwdriver
• Brake cleaner
• C-Clamp or brake caliper tool
• Jack and jack stands
• Lug wrench
• Safety glasses and gloves

Step 2: Prepare the Vehicle

• Park the vehicle on a flat surface and engage the parking brake.
• Loosen the lug nuts on the front wheels slightly while the vehicle is still on the ground.
• Use the jack to lift the front of the vehicle and secure it with jack stands.

Step 3: Remove the Wheel

• Take off the lug nuts completely and remove the front wheel.
• Set the wheel aside in a safe location.

Step 4: Access the Brake Caliper

• Locate the brake caliper which houses the brake pads.
• Remove the caliper bolts using the socket or wrench. Typically, there are two bolts to remove.
• Carefully slide the caliper off the brake disc. Do not let it hang by the brake line; use a rope or bungee cord to support it if necessary.

Step 5: Remove Old Brake Pads

• With the caliper removed, take out the old brake pads from their housing.
• Note how the pads are positioned as you will need to install the new ones similarly.

Step 6: Remove the Old Brake Disc

• Locate the retaining screws or bolts that hold the brake disc in place. Remove them with a screwdriver or socket.
• Slide the old brake disc off the wheel hub. If it is stuck, you may need to tap it gently with a hammer.

Step 7: Install the New Brake Disc

• Position the new brake disc onto the wheel hub.
• Secure it with the retaining screws or bolts you removed earlier.

Step 8: Install New Brake Pads

• Before installing the new pads, compress the brake caliper piston using a C-clamp or brake caliper tool. This allows enough space for the new pads.
• Insert the new brake pads into the caliper bracket, matching their position to the old pads.

Step 9: Reattach the Brake Caliper

• Carefully slide the caliper back over the new brake pads and onto the brake disc.
• Reinstall the caliper bolts and tighten them securely.

Step 10: Reinstall the Wheel

• Place the wheel back onto the hub.
• Hand-tighten the lug nuts onto the wheel bolts.

Step 11: Lower the Vehicle

• Remove the jack stands and lower the vehicle back to the ground.
• Once the vehicle is on the ground, use the lug wrench to tighten the lug nuts in a criss-cross pattern to ensure even tightening.

Step 12: Test the Brakes

• Before driving, pump the brake pedal a few times to ensure the brake pads are properly seated against the disc.
• Check for any unusual noises or issues when testing the brakes at low speeds.

Conclusion

Replacing the front brake discs and pads on a Hyundai ix35 is a manageable task that can enhance your vehicle's safety. Always ensure you follow safety precautions and check that all components are securely fastened before driving. Regularly inspect your brakes to maintain optimal performance, and consider consulting a professional if you encounter any issues during the process.