How To Prepare And Lay A Base For Pavers - DIY At Bunnings

Title: How to Prepare and Lay a Base for Pavers - DIY at Bunnings

Tools and Materials Required:

1. Rake
2. Shovel
3. Wheelbarrow
4. Plate compactor
5. Lump hammer
6. Measuring tools
7. Spirit level
8. Straight edge

Step-by-Step Tutorial:

1. Gather Tools and Materials:

   • Ensure you have all the necessary tools and materials mentioned above before starting the project.

2. Check for Squareness:

   • Use a straight edge to ensure the corner of the building is square.
   • Run a straight line around the building to establish a baseline.

3. Measure for Formwork:

   • Measure from the corner to the end of the wall to determine the dimensions for the formwork.
   • Calculate the length, width, and depth of the road base needed for the project.

4. Set Up Formwork:

   • Place the first piece of formwork along the measured dimensions.
   • Ensure the formwork is level and secure by using a spirit level and hammering stakes into the ground.

5. Intersect Formwork:

   • Position the second piece of formwork to intersect with the first piece to create a perfect square.
   • Secure the formwork in place to maintain the shape.

6. Prepare for Road Base:

   • Remove any unnecessary formwork to create a clear path for the wheelbarrow to dump the road base.
   • Compact the road base using a plate compactor for stability.

7. Compact the Road Base:

   • Use the plate compactor to compact the road base evenly to prevent dust and ensure proper compaction.

8. Check Surface Flatness:

   • Before laying the pavers, ensure the surface is flat and level by using a spirit level.
   • Adjust the surface as needed to achieve a smooth finish for the pavers.

9. Start Laying Pavers:

   • Once the base is prepared and leveled, you can begin laying the pavers according to your desired pattern.

10. Continue Paving:

    • Continue laying the pavers, ensuring they are snugly fit together and leveled with each other.

11. Finish the Project:

    • Once all pavers are laid, fill the gaps between them with sand or gravel.
    • Use a plate compactor to compact the pavers and ensure they are securely in place.

12. Clean Up:

    • Remove any excess materials and tools from the work area.
    • Step back and admire your newly paved area!

By following these steps, you can effectively prepare and lay a base for pavers, creating a durable and visually appealing outdoor surface.