Trocando TELA de NOTEBOOK: Reaproveitamos um VELHO para recuperar um NOVO!

Introduction

In this tutorial, we'll guide you through the process of swapping a broken laptop screen with a functional one from an old notebook. This step-by-step guide is perfect for anyone looking to recycle old electronics and save money while restoring a usable laptop. Following this tutorial, you'll be able to breathe new life into a broken device by using parts from another.

Step 1: Gather Your Materials

Before starting the repair, ensure you have all the necessary tools and materials:

• A laptop with a broken screen
• An old laptop (donor) with a functional screen
• Screwdriver set (usually Phillips head)
• Plastic prying tools (to avoid damage)
• Anti-static wrist strap (optional but recommended)
• A clean workspace

Practical Tips

• Make sure both laptops are powered off and unplugged.
• Ground yourself to prevent static electricity from damaging components.

Step 2: Disassemble the Broken Laptop

Carefully take apart the laptop with the broken screen to access the display:

1. Remove the Battery: If your laptop has a removable battery, take it out.
2. Unscrew the Back Panel: Use the screwdriver to remove screws from the back panel.
3. Disconnect the Screen Cable: Look for the screen cable connected to the motherboard and gently detach it.
4. Remove the Screen: Unscrew and carefully lift the broken screen from the laptop frame.

Common Pitfalls

• Be cautious when disconnecting cables; they can be fragile.
• Keep track of all screws and small parts to avoid losing them.

Step 3: Prepare the Donor Laptop

Next, prepare the old laptop to extract the screen:

1. Power Off and Unplug: Make sure the old laptop is completely powered off.
2. Remove the Battery: If applicable, take out the battery.
3. Disassemble the Old Laptop: Follow similar steps as in the previous section to access the functional screen.

Practical Advice

• Take photos during disassembly for reference when reassembling both laptops.

Step 4: Install the Functional Screen

With both laptops disassembled, it's time to swap the screens:

1. Connect the Functional Screen: Carefully connect the screen cable from the functional screen to the motherboard of the laptop with the broken screen.
2. Secure the Screen: Align the functional screen into the laptop frame and screw it in place.
3. Reconnect the Back Panel: Replace the back panel and secure it with screws.

Final Check

• Ensure all connections are tight and secure before proceeding.

Step 5: Test the Laptop

Now that the new screen is installed, it's time to test the functionality:

1. Reconnect the Battery: If you removed the battery, put it back in.
2. Power On the Laptop: Turn on the laptop and check if the new screen works properly.
3. Adjust Display Settings: Configure any display settings if necessary.

Conclusion

Congratulations! You have successfully swapped the screen from an old laptop to a broken one. This not only saves money but also promotes recycling and sustainability. If the laptop is functioning well, consider upgrading other components or looking into software optimizations to enhance performance. Happy tinkering!