Join 2 or 3 Cell Connections for 1 fast connection. Slate Router Smoothwan Installation

How to Join Multiple Cellular Connections Using Slate Router with Smoothwan Installation

1. Introduction to Speedify and Slate Router:

   • Erik Gulbrandsen introduces the concept of installing Speedify on the Slate ax router to bond two or more Cellular Connections for a more stable upstream connection.

2. Preparation:

   • Purchase a consumer-grade Slate ax router.
   • Connect the router to a power source using a USB power bank.
   • Connect your cell phones to the router for bonded Cellular Connections.

3. Firmware Installation:

   • Download the Smoothwan firmware from the Smoothwan website.
   • Upload the firmware to the router, following the provided instructions.
   • Change the settings to keep settings off during the installation process.

4. Connecting to Smoothwan Setup Wi-Fi:

   • Connect to the Smoothwan setup Wi-Fi network using the SSID and password provided.
   • Plug at least one WAN with internet access into the LAN port of the router.

5. Setting Up Wireless Connections:

   • Connect to the 2.4 GHz network and save the settings.
   • Update and install Speedify on the router.

6. Configuring iOS Device Connection:

   • Disable the Smoothwan setup wireless connection to connect an iOS device to the 2.4 GHz network.
   • Set up a personal hotspot on your iOS device with a password.
   • Enable the hotspot and connect to it from the router settings.

7. Adding Additional Connections:

   • Connect additional devices or hotspots to the router using available ports.
   • Utilize different ports for different connections, such as T-Mobile hotspot, cell phone, and wireless network.

8. Optimizing Connections:

   • Disconnect unnecessary devices to free up ports for additional connections.
   • Ensure each connected device is properly configured and providing a stable connection.

9. Finalizing Setup:

   • Test the connections to ensure all devices are properly connected and functioning.
   • Troubleshoot any connectivity issues and adjust settings as needed.

10. Conclusion:

    • Subscribe to Erik Gulbrandsen's channel for more tutorials and updates.
    • Leave any questions or feedback in the comments section for further assistance.