HUAWEI P SMART 2019 POT-LX1 IMEI REPAIR SIGMA BOX | POT-LX1 IMEI 0000 FIX | GSM SOLUTIONS

Introduction

This tutorial provides a step-by-step guide on how to fix the IMEI number issue (IMEI 0000) on the Huawei P Smart (POT-LX1) using the Sigma Box tool. An incorrect or missing IMEI can hinder device functionality, especially for network services. Following these instructions will help you restore your device's IMEI and improve its performance.

Step 1: Prepare Your Equipment

Before you begin the repair process, ensure you have the necessary tools.

• Required Tools:
  • Sigma Box or Sigma Key
  • USB cable for your Huawei P Smart
  • A computer with the Sigma software installed
  • Backup of your device data (optional but recommended)

Step 2: Connect Your Device

Start by connecting your Huawei P Smart to your computer.

1. Power off your device.
2. Connect the USB cable to your phone and then to the computer.
3. Launch the Sigma Software on your computer.

Step 3: Identify Your Device

You need to ensure that the Sigma software recognizes your device.

• Check Device Recognition:
  • In the Sigma software, select the option to detect the connected device.
  • Confirm that your Huawei P Smart (POT-LX1) is detected.

Step 4: Repair IMEI

Now, you will start the IMEI repair process.

1. Select the IMEI Repair option in the Sigma software.
2. Follow the on-screen instructions carefully.
3. When prompted, enter the correct IMEI number that you want to write to the device.

Step 5: Write Certificate

To finalize the repair, you may need to write a certificate.

1. Locate the certificate file that matches your device.
2. Select the option to write the certificate in the Sigma software.
3. Follow any additional prompts to complete the certificate writing process.

Step 6: Verify the IMEI

After completing the repair and writing the certificate, it’s important to verify the changes.

• Verification Steps:
  1. Disconnect your device and restart it.
  2. Dial *#06# on your phone to check the IMEI number.
  3. Ensure that the IMEI displayed matches the number you entered during the repair process.

Conclusion

In this tutorial, you learned how to fix the IMEI 0000 issue on your Huawei P Smart (POT-LX1) using the Sigma Box. By following these steps, you should be able to restore your device's IMEI effectively. If you experience any issues during the process, consider consulting online forums or reaching out to GSM solution communities for additional support. Remember to keep backups of your important data and proceed cautiously with device repairs.