Разборка Poco x3 pro | Замена дисплея |

Introduction

This tutorial provides a step-by-step guide on disassembling the Poco X3 Pro and replacing its display. Whether you're looking to fix a cracked screen or upgrade your device, this process will help you understand the necessary steps to take.

Step 1: Gather Your Tools

Before starting the disassembly, ensure you have the following tools ready:

• Phillips screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Heat gun or hairdryer (for softening adhesive)

Step 2: Power Off the Device

• Turn off your Poco X3 Pro completely to avoid any electrical damage during disassembly.

Step 3: Remove the Back Cover

• Use a heat gun or hairdryer to warm the edges of the back cover. This helps soften the adhesive.
• Place a suction cup on the back cover and gently pull to create a gap.
• Insert a plastic opening tool into the gap and carefully work your way around the edges to detach the back cover.

Step 4: Disconnect the Battery

• Locate the battery connector on the motherboard.
• Use a Phillips screwdriver to remove the screws securing the battery connector.
• Gently lift the connector using tweezers to disconnect the battery.

Step 5: Remove the Display Assembly

• Unscrew the screws holding the display assembly in place using the Phillips screwdriver.
• Carefully use the plastic opening tool to pry the display assembly from the frame. Start at one corner and work your way around.
• If the display is stuck, reapply heat to soften the adhesive.

Step 6: Replace the Display

• Take the new display and align it with the frame.
• Press the display gently into place, ensuring it fits snugly.
• Reconnect the display connector to the motherboard.

Step 7: Reconnect the Battery

• Place the battery connector back onto the motherboard.
• Secure it with the screws previously removed.

Step 8: Reattach the Back Cover

• Align the back cover with the frame of the device.
• Press down firmly around the edges to ensure a secure fit.
• If necessary, reapply heat to help the adhesive bond.

Conclusion

You have successfully disassembled your Poco X3 Pro and replaced the display. Always double-check your work before powering on the device. If any issues arise, revisit your connections or consult a professional for assistance. With these steps, you can save time and money by handling the repair yourself.