Flash unbrick oppo A71 mediatek (CPH1717)

Introduction

This tutorial will guide you through the process of unbricking an Oppo A71 (CPH1717) device that has become non-functional after a flash. We'll utilize SP Flash Tool and provide you with all necessary downloads, including drivers and firmware. By following these steps, you can restore your device to working condition.

Step 1: Prepare Your Tools

Before you start, ensure you have the following ready:

• SP Flash Tool: This software will allow you to flash your device.
• Oppo A71 Firmware: Download the firmware from this link.
• USB Drivers: Install the necessary drivers to recognize your device.
• Manual Format Code (if needed): Access it here.

Installation steps:

1. Download the SP Flash Tool and install it on your computer.
2. Download the firmware and extract the files to a folder.
3. Install the USB drivers to ensure your computer can detect the device.

Step 2: Connect Your Device

Follow these steps to connect your Oppo A71 to the computer:

1. Turn off your phone completely.
2. Connect the phone to the computer using a USB cable.
3. Ensure that the device is detected by your computer. You may see a notification indicating that drivers are installed.

Step 3: Open SP Flash Tool

1. Launch the SP Flash Tool application on your computer.
2. Click on the "Download" tab in the tool.

Step 4: Load Firmware Files

1. In the SP Flash Tool, click on "Scatter-loading" to load the firmware files.
2. Navigate to the folder where you extracted the firmware files.
3. Select the appropriate scatter file (usually named MT6750_Android_scatter.txt).

Step 5: Start the Flashing Process

1. Ensure the correct files are loaded in the SP Flash Tool.
2. Click on the "Download" button to start the flashing process.
3. A progress bar will appear, indicating the flashing status.

Step 6: Wait for Completion

1. Do not disconnect your device during the flashing process. Wait until the progress bar reaches 100%.
2. Once completed, you will see a green checkmark indicating a successful flash.

Step 7: Reboot Your Device

1. Disconnect the USB cable from the device.
2. Turn on your Oppo A71. The device should boot up normally.

Conclusion

You have successfully unbricked your Oppo A71 (CPH1717) using the SP Flash Tool. If your device does not boot up or if you encounter errors, consider revisiting the steps to ensure everything was done correctly. For additional help with IMEI repair, refer to the provided link to the video tutorial. Always ensure you have the right firmware and follow the steps carefully to avoid issues.