Quick Intro to Carlson's Easy-to-Use RoadNETwork in Carlson Civil
3 min read
4 months ago
Published on May 16, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
Title: Quick Intro to Carlson's Easy-to-Use RoadNETwork in Carlson Civil
Step-by-Step Tutorial:
-
Introduction to Road Design in Carlson Civil:
- The video introduces the basic steps required to create a single road using Carlson Civil.
- The focus is on creating a simple road design and getting started with Road design in Carlson Civil.
-
Setting Up the Project:
- Start by creating a new project in Carlson Civil.
- Create a new layer, such as CL (Center Line), to draw a standard CAD polyline on the surface where the road will be placed.
- Freeze off some existing contours to make it easier to see where the road will be located.
-
Using Road Network:
- Utilize the Road Network feature in Carlson Civil.
- Choose an existing RDN file as the basis for the road network.
-
Configuring Settings:
- Check the settings in the dialogue box.
- Ensure that "New Surface Triangulate" and "Contour" options are selected appropriately.
- Skip unnecessary options like labels, elevating pads, lots, or merging with existing surfaces.
-
Adding Center Line File:
- Attach an external Center Line file to the project.
- Name the Center Line file, for example, "Oak Street."
-
Creating the Road Profile:
- Edit the Center Line file in the editor.
- Add PVIs (Point of Vertical Intersection) along the road to define the vertical design.
- Adjust the slope, station, or elevation using the graphical editor.
-
Designing the Road Cross Section:
- Define cross slopes for the road.
- Specify measurements for gravel and asphalt layers.
- Customize curbs and other elements as needed.
-
Finalizing the Road Design:
- Process the road design by clicking on the "Process" button.
- The road will be completely modeled in 3D with volumes, contours, and cut/fill data.
-
Reviewing the Design:
- Check the output data and review the road design.
- Save the project and view the entire road design, including volumes and contours.
-
Completing the Road Design:
- Save the project and finalize the road design.
- Review the new volumes and ensure the design matches the existing ground conditions.
-
Conclusion:
- Completing a road design in Carlson Civil is straightforward and can be done in under 10 minutes from scratch.
- The process involves setting up the project, creating the road profile, designing the cross-section, and processing the road design.
By following these steps, you can create a simple road design using Carlson Civil's RoadNETwork feature efficiently and effectively.