Mobigo 2 plus,How to Fix Call. How to flash Mobigo 2 + and Solve 100% the probelm of not Calling

Introduction

This tutorial provides a step-by-step guide on how to fix calling issues on the Mobigo 2 Plus device. By following these instructions, you can effectively flash your device and resolve the problem of not being able to make calls. This guide is relevant for users experiencing connectivity issues and looking for a reliable solution.

Step 1: Gather Necessary Tools and Files

Before starting the flashing process, ensure you have the following:

• USB Cable: For connecting your Mobigo 2 Plus to the computer.
• Flashing Tool: Download the appropriate flashing software for your device.
• Firmware File: Obtain the latest firmware for the Mobigo 2 Plus from a trusted source.

Tip: Always back up any important data from your device, as flashing may erase all existing information.

Step 2: Install Drivers

To ensure your computer recognizes the Mobigo 2 Plus:

1. Download and install the necessary USB drivers for the device.
2. Connect your Mobigo 2 Plus to the computer using the USB cable.
3. Confirm that the device is detected by your computer.

Common Pitfall: Skipping driver installation may lead to detection issues during the flashing process.

Step 3: Prepare the Flashing Tool

Once the drivers are installed:

1. Open the flashing tool on your computer.
2. Load the firmware file you downloaded earlier into the tool.
3. Configure the settings according to your device specifications.

Practical Advice: Ensure that you are using the correct firmware version to avoid bricking your device.

Step 4: Begin the Flashing Process

With everything set up:

1. Power off your Mobigo 2 Plus.
2. Put your device into flash mode. This might involve holding certain buttons while powering it on (refer to your device’s manual for specifics).
3. Click the "Start" button in the flashing tool to begin the process.

Tip: Monitor the flashing progress and do not disconnect the device until the process is complete.

Step 5: Verify the Fix

After the flashing process is complete:

1. Restart your Mobigo 2 Plus.
2. Test the calling functionality by making a call.

Note: If you continue to experience issues, consider checking your SIM card and network settings.

Conclusion

Following these steps will help you successfully flash your Mobigo 2 Plus and resolve calling issues. Remember to always use reliable sources for firmware and tools, and back up your data before proceeding with any flashing process. If problems persist, consider seeking professional assistance or reaching out to customer support for further help.