Yamaha Star 650 Maintenance - Oil Change With Filter

Introduction

This tutorial provides a comprehensive guide for changing the oil and oil filter in a Yamaha Star 650 motorcycle. Regular maintenance, including oil changes, is crucial for keeping your bike running smoothly and prolonging its lifespan. This step-by-step guide will help you perform the oil change effectively, even if you're new to motorcycle maintenance.

Step 1: Gather Necessary Tools and Materials

Before starting the oil change, make sure you have the following tools and materials ready:

• Yamalube 10w40 oil (or oil recommended by your local Yamaha dealer)
• Oil filter (ensure compatibility with your Yamaha Star 650)
• 17mm spanner (preferred) or a crow's foot wrench
• Oil catch pan
• Funnel
• Clean rags
• New O-ring for the filter cover (recommended)

Step 2: Prepare the Motorcycle

• Ensure the motorcycle is on a level surface and, if possible, use a bike stand for stability.
• If the motorcycle has been sitting for a while, you may choose not to start it before the oil change to avoid the oil being warmed up. This can make the oil easier to drain, but it is a personal choice.

Step 3: Drain the Old Oil

• Place the oil catch pan underneath the engine's oil drain bolt.
• Use the 17mm spanner or crow's foot to loosen and remove the drain bolt carefully. Allow the old oil to completely drain into the pan.
• Once drained, replace the drain bolt and tighten it securely.

Step 4: Replace the Oil Filter

• Locate the oil filter on your motorcycle.
• Use the appropriate tool to remove the old oil filter. Be cautious, as some oil may still be in the filter.
• Before installing the new filter, check the O-ring on the filter cover. Replace it if it shows any signs of wear.
• Apply a small amount of new oil to the rubber O-ring of the new filter. This ensures a better seal.
• Install the new oil filter, tightening it according to the manufacturer's specifications.

Step 5: Refill with New Oil

• Remove the oil filler cap on the engine.
• Using a funnel, carefully pour the new Yamalube 10w40 oil into the engine. The amount needed will depend on whether you replaced the filter; consult your owner's manual for the correct volume.
• It may be beneficial to have a second person assist with this step, especially if your bike is not on a stand.

Step 6: Check Oil Level

• After refilling, allow the oil to settle for a few minutes.
• Use the dipstick or sight glass to check the oil level. Add more oil if necessary to reach the recommended level.

Step 7: Clean Up

• Wipe any spilled oil and ensure the area is clean.
• Dispose of the old oil and filter properly, following local environmental regulations.

Conclusion

Changing the oil and filter in your Yamaha Star 650 is a straightforward process that can extend the life of your motorcycle. Regular maintenance not only keeps your bike running smoothly but also enhances your riding experience. Always refer to your owner's manual for specific details related to your model. Happy riding!