HOW TO REFILL INK CANON CARTRIDGES (TAGALOG) | PG 745s, CL 746s | CANON PIXMA 2570s printer

Introduction

This tutorial will guide you through the process of refilling the ink cartridges for the Canon Pixma 2570s printer, specifically the PG 745s and CL 746s cartridges. Refilling your cartridges can save you money and reduce waste, making it an eco-friendly choice.

Step 1: Gather Your Materials

Before starting the refilling process, make sure you have the following materials ready:

• Replacement ink for PG 745s and CL 746s cartridges
• A syringe for precise ink transfer
• A pair of gloves (to keep your hands clean)
• Paper towels (for any spills)
• A flat surface to work on

You can purchase the ink and syringe from online stores like Shopee.

Step 2: Prepare the Cartridges

1. Remove the cartridges from your Canon Pixma 2570s printer:

   • Open the printer cover.
   • Gently press down on the cartridge to release it.
   • Carefully pull it out of the printer.

2. Locate the refill holes:

   • For the PG 745s (black), there is usually a hole on the top.
   • For the CL 746s (color), there are multiple holes.

3. Clean the cartridge:

   • Use a paper towel to wipe any dust or leftover ink around the holes.

Step 3: Fill the Syringe with Ink

1. Draw ink into the syringe:

   • Insert the syringe into the ink bottle.
   • Pull the plunger to fill the syringe with ink. Ensure you have the correct color for your CL 746s cartridge.

2. Remove any air bubbles:

   • Tap the syringe gently to bring air bubbles to the top.
   • Push the plunger slightly to expel the air.

Step 4: Refill the Cartridge

1. Inject ink into the cartridge:

   • Take the syringe and carefully insert the needle into the refill hole of the cartridge.
   • Slowly push down on the plunger to inject ink into the cartridge.
   • For the PG 745s, fill it about 5-7 ml, and for the CL 746s, fill each color compartment with about 3-5 ml.

2. Avoid overfilling:

   • Monitor the ink level to prevent overflow. Stop injecting once you see ink at the top of the hole.

Step 5: Seal and Reinstall the Cartridges

1. Seal the refill holes:

   • If necessary, use tape or a sticker to cover the holes securely.
   • Ensure there are no leaks by checking the seals.

2. Reinstall the cartridges:

   • Insert the cartridges back into the printer.
   • Press down until they click into place.

3. Close the printer cover.

Conclusion

You have now successfully refilled your Canon PG 745s and CL 746s ink cartridges. Regularly check your ink levels and repeat this process as needed. Always keep your workspace clean and handle ink with care to avoid spills. For future refills, consider purchasing additional ink and syringes in advance to streamline the process. Happy printing!