How to control more than 8 plug-in parameters in MIDI remote | Club Cubase Nov 8th 2022

Introduction

This tutorial will guide you through controlling more than eight plug-in parameters in MIDI remote within Cubase. By following these steps, you’ll enhance your workflow and optimize your music production process, allowing for greater control over your virtual instruments and effects.

Step 1: Open MIDI Remote in Cubase

1. Launch Cubase and open your project.
2. Navigate to the top menu and select Studio.
3. Click on MIDI Remote to open the MIDI Remote setup window.

Step 2: Configure MIDI Controller

1. In the MIDI Remote window, you will see the Controller Setup section.
2. Click on Add Controller to create a new controller profile.
3. Choose your MIDI controller from the list or select Generic Remote if it’s not listed.
4. Assign the MIDI input and output ports corresponding to your controller.

Step 3: Add Plug-in Parameters

1. Locate the Plug-in Parameters section in the MIDI Remote window.
2. Click Add to include new parameters.
3. For each parameter, select the desired plug-in and the specific parameter you want to control.
4. Repeat this process until you have added more than eight parameters.

Step 4: Map MIDI Controls

1. After adding parameters, you need to map them to your MIDI controller.
2. Select the parameter you want to map.
3. Move the corresponding control on your MIDI controller (e.g., a knob or fader) to establish the link.
4. Ensure that the MIDI messages are received correctly in the MIDI Remote window.

Step 5: Test the Configuration

1. With your project open, activate your MIDI controller.
2. Move the mapped controls and observe if the plug-in parameters respond accordingly.
3. If any parameters do not respond, revisit the mapping settings and ensure everything is configured correctly.

Step 6: Save Your MIDI Remote Setup

1. Once you are satisfied with your setup, click on Save in the MIDI Remote window.
2. Name your configuration for easy identification in future projects.
3. Optionally, back up your configuration by exporting it for later use.

Conclusion

You have now successfully configured your MIDI remote to control more than eight plug-in parameters in Cubase. This setup significantly improves your ability to manipulate sounds in real-time. For future projects, remember to save your configurations and explore additional parameters to enhance your creativity even further. Happy music making!