How to Change the Rolls on the HeatSeal Ultima 65 Laminator

Introduction

This tutorial will guide you through the process of changing the rolls on the HeatSeal Ultima 65 Laminator. The Ultima 65 is a popular choice for laminating projects, and knowing how to replace the rolls is essential for maintaining optimal performance. Follow these steps to ensure a smooth and efficient roll change.

Step 1: Prepare the Laminator

• Power Off the Machine: Ensure that the laminator is turned off and unplugged to avoid any accidents.
• Clear the Workspace: Remove any items around the laminator to provide ample space for the roll change process.

Step 2: Remove the Old Rolls

• Open the Laminator: Locate the release levers on both ends of the machine. Pull these levers to open the laminator.
• Lift the Roll Holder: Carefully lift the roll holder to access the old rolls.
• Remove the Rolls:
  • Slide the old laminating rolls off the roll holder.
  • Dispose of or recycle the old rolls appropriately.

Step 3: Install the New Rolls

• Select the Correct Roll Size: Ensure you have either 25" or 27" laminating rolls, compatible with the Ultima 65.
• Position the New Rolls:
  • Slide the new rolls onto the roll holder.
  • Make sure the rolls are seated properly and aligned with the machine.

Step 4: Thread the Laminator

• Guide the Film: Pull the laminating film from the rolls and guide it through the laminating path.
• Check for Tangles: Ensure the film is not twisted or tangled as you thread it through the rollers.
• Close the Laminator: Once the film is correctly positioned, close the laminator by pushing down the roll holder until it clicks into place.

Step 5: Test the Machine

• Power On the Laminator: Plug the machine back in and turn it on.
• Run a Test Lamination: Use a test piece of paper to ensure the laminator is functioning correctly with the new rolls.
• Adjust Settings if Necessary: If the lamination isn’t smooth, check the settings and adjust the temperature or speed according to the manufacturer’s recommendations.

Conclusion

Changing the rolls on the HeatSeal Ultima 65 Laminator is a straightforward process that can significantly enhance your laminating projects. Remember to always use the proper roll size and ensure everything is aligned correctly before starting the machine. For further assistance or to purchase new laminating rolls, visit MyBinding.com. Happy laminating!