How to zero a AK 47 | Tactical Rifleman
Table of Contents
Introduction
In this tutorial, we will guide you through the process of zeroing the iron sights on an AK-47 rifle, as taught by experienced military instructors. This technique is particularly effective at a 25-meter range, making it a practical choice for most shooters. Zeroing your rifle properly is essential for accuracy, and this step-by-step guide will help you achieve that.
Step 1: Gather Required Equipment
Before you begin, ensure you have the following items ready:
- AK-47 rifle with iron sights
- Ammunition (preferably 7.62x39mm)
- 25-meter target
- Shooting rest or support (if available)
- Safety gear (eye and ear protection)
Step 2: Set Up Your Shooting Range
- Find a 25-meter shooting range that is safe and accessible.
- Place your target at the 25-meter mark.
- Ensure that your shooting position allows for stability and comfort.
Step 3: Initial Sight Adjustment
- Check the current sight settings. Ensure the rear sight is set to "1" for the initial zeroing process.
- Aim at the center of the target. Use a proper shooting stance, either standing, kneeling, or prone, depending on your comfort level.
Step 4: Fire a Group of Shots
- Fire a group of 3 to 5 shots at the target. Focus on maintaining a consistent aim and trigger pull.
- After firing, do not look at the target yet. Instead, take a moment to analyze your shooting form.
Step 5: Evaluate Your Shots
- After firing your group, approach the target and assess where your shots landed.
- Note whether the shots are grouping to the left, right, high, or low relative to your aim point.
Step 6: Adjust Your Sights
- Based on your evaluation, make the necessary adjustments to your iron sights:
- If shots are high, adjust the rear sight down.
- If shots are low, adjust the rear sight up.
- If shots are to the left, adjust the front sight to the right.
- If shots are to the right, adjust the front sight to the left.
- Make small adjustments, typically 1 click at a time, and then fire another group to check your progress.
Step 7: Repeat the Process
- Continue firing groups and adjusting your sights until your shots consistently hit the center of the target.
- Aim for a tight grouping, indicating that your iron sights are properly zeroed.
Conclusion
Zeroing your AK-47 using this method will enhance your shooting accuracy significantly. Remember to be patient and make small adjustments as needed. Once you achieve a tight grouping at 25 meters, your rifle will be ready for more extended shooting exercises or practical applications. Enjoy your time at the range and stay safe!