How to zero a AK 47 | Tactical Rifleman

Introduction

In this tutorial, we will guide you through the process of zeroing the iron sights on an AK-47 rifle, as taught by experienced military instructors. This technique is particularly effective at a 25-meter range, making it a practical choice for most shooters. Zeroing your rifle properly is essential for accuracy, and this step-by-step guide will help you achieve that.

Step 1: Gather Required Equipment

Before you begin, ensure you have the following items ready:

• AK-47 rifle with iron sights
• Ammunition (preferably 7.62x39mm)
• 25-meter target
• Shooting rest or support (if available)
• Safety gear (eye and ear protection)

Step 2: Set Up Your Shooting Range

• Find a 25-meter shooting range that is safe and accessible.
• Place your target at the 25-meter mark.
• Ensure that your shooting position allows for stability and comfort.

Step 3: Initial Sight Adjustment

• Check the current sight settings. Ensure the rear sight is set to "1" for the initial zeroing process.
• Aim at the center of the target. Use a proper shooting stance, either standing, kneeling, or prone, depending on your comfort level.

Step 4: Fire a Group of Shots

• Fire a group of 3 to 5 shots at the target. Focus on maintaining a consistent aim and trigger pull.
• After firing, do not look at the target yet. Instead, take a moment to analyze your shooting form.

Step 5: Evaluate Your Shots

• After firing your group, approach the target and assess where your shots landed.
• Note whether the shots are grouping to the left, right, high, or low relative to your aim point.

Step 6: Adjust Your Sights

• Based on your evaluation, make the necessary adjustments to your iron sights:
  • If shots are high, adjust the rear sight down.
  • If shots are low, adjust the rear sight up.
  • If shots are to the left, adjust the front sight to the right.
  • If shots are to the right, adjust the front sight to the left.
• Make small adjustments, typically 1 click at a time, and then fire another group to check your progress.

Step 7: Repeat the Process

• Continue firing groups and adjusting your sights until your shots consistently hit the center of the target.
• Aim for a tight grouping, indicating that your iron sights are properly zeroed.

Conclusion

Zeroing your AK-47 using this method will enhance your shooting accuracy significantly. Remember to be patient and make small adjustments as needed. Once you achieve a tight grouping at 25 meters, your rifle will be ready for more extended shooting exercises or practical applications. Enjoy your time at the range and stay safe!