Dexter E-Z Lube Axle - How to Grease Casita Travel Trailer Wheel Bearings by RV Adventures

Introduction

This tutorial will guide you through the process of greasing the wheel bearings on your Casita Travel Trailer using Dexter E-Z Lube fittings. This method simplifies maintenance compared to traditional techniques, allowing you to keep your RV's wheels in optimal condition with minimal effort.

Step 1: Gather Your Tools and Materials

Before starting, ensure you have the following items ready:

• Grease gun with compatible grease
• E-Z Lube grease fittings (if replacements are needed)
• Clean rags or paper towels
• Safety goggles and gloves for protection
• Wheel chocks to prevent movement

Step 2: Prepare the Trailer

1. Park on Level Ground: Ensure your trailer is on a flat surface for stability.
2. Chock the Wheels: Use wheel chocks to secure the trailer in place.
3. Lift the Trailer: If necessary, use a jack to elevate the trailer slightly for better access to the wheel bearings.

Step 3: Locate the E-Z Lube Fittings

1. Identify the Fittings: E-Z Lube fittings are typically located on the end of the axle. They look like small grease nipples.
2. Inspect for Damage: Check the fittings for any signs of wear or damage that may prevent proper greasing.

Step 4: Grease the Wheel Bearings

1. Attach the Grease Gun: Connect the nozzle of your grease gun to the E-Z Lube fitting securely.
2. Pump Grease: Slowly pump grease into the fitting. You should see the old grease being pushed out, ensuring that the new grease is replacing it.
3. Monitor Grease Flow: Keep an eye on the grease; once you see it starting to ooze out from the front of the bearing, stop pumping.
4. Repeat for Each Wheel: Follow the same process for all wheels on your trailer.

Step 5: Clean Up

1. Remove Excess Grease: Wipe off any excess grease from the fittings and surrounding areas with a clean rag.
2. Inspect the Fittings: Ensure that the fittings are clean and functioning properly after greasing.

Conclusion

Greasing your Dexter E-Z Lube axle bearings is a straightforward process that can significantly extend their lifespan and improve your travel trailer's performance. Regular maintenance is essential for safe and enjoyable RV adventures. Consider scheduling this task every 2,000 miles or as recommended by your manufacturer to keep your trailer in top shape. Happy camping!