Installazione automazione Avidsen Orea 550 , Ref :114460

Introduction

This tutorial will guide you through the installation of the Avidsen Orea 550 automatic gate opener. Designed for sliding gates made of various materials, the Orea 550 offers functionalities such as automatic closing, manual release, and adjustable speed settings. This step-by-step guide will help you set up your gate opener effectively and safely.

Step 1: Gather Required Tools and Materials

Before starting the installation, ensure you have all necessary tools and materials:

• Avidsen Orea 550 gate opener kit
• Screwdriver set
• Wrench set
• Level
• Measuring tape
• Electric drill
• Safety gear (gloves and goggles)

Step 2: Prepare the Gate

Prepare your sliding gate for installation by following these steps:

1. Clear the Area: Remove any obstructions near the gate and ensure the ground is level.
2. Measure the Gate: Confirm that your gate is within the specifications (up to 8 meters and 500 kg).
3. Verify Movement: Ensure the gate slides smoothly without any hindrance.

Step 3: Install the Motor Unit

Mount the motor unit according to the following instructions:

1. Position the Motor: Place the motor unit at the base of the gate track.
2. Secure the Motor: Use screws and a drill to fasten the motor securely to the ground.
3. Check Alignment: Ensure the motor is aligned with the gate's path.

Step 4: Connect the Gate Arm

Attach the gate arm to the motor:

1. Attach Arm to Gate: Connect one end of the arm to the gate and the other end to the motor.
2. Adjust for Length: Make sure the arm is adjusted to the appropriate length for optimal movement.

Step 5: Wiring and Power Supply

Set up the electrical components:

1. Connect the Power Supply: Follow the manufacturer's instructions to connect the motor to the power supply.
2. Wire the Remote Control: If included, connect the remote control receiver according to the manual.
3. Test Connections: Ensure all electrical connections are secure.

Step 6: Configure Settings

Adjust settings for the gate opener:

1. Set Speed and Force: Use the control panel to adjust the speed and force settings according to your preference.
2. Configure Automatic Closing: Set the timer for automatic closing, or choose semi-automatic using the remote.

Step 7: Test the System

After installation, perform a thorough test:

1. Initial Test: Activate the motor to ensure the gate opens and closes smoothly.
2. Obstacle Test: Check the safety feature by placing an object in the gate's path to see if it stops.
3. Remote Functionality: Test the remote control to ensure it activates the gate.

Conclusion

You have successfully installed the Avidsen Orea 550 automatic gate opener. Remember to regularly check and maintain the system for optimal performance. For further support or troubleshooting, refer to the product manual or contact customer service. Enjoy the convenience of your newly automated sliding gate!