How to Perform Factory Reset on Locked Motorola Phone? Wipe Data with No Pattern / Pin / Code

Introduction

This tutorial will guide you through the process of performing a factory reset on a locked Motorola phone without needing a password. A factory reset will erase all data on the device and restore it to its original settings. This method is particularly useful if you’ve forgotten your PIN, pattern, or password, and need to regain access to your device.

Step 1: Power Off the Device

• Press and hold the power button on your Motorola phone.
• Select "Power off" from the menu that appears on the screen.
• Wait for the device to completely shut down.

Step 2: Enter Recovery Mode

• Once the phone is off, press and hold the Volume Down button and the Power button simultaneously.
• Keep holding both buttons until the bootloader screen appears.
• Use the Volume Down button to navigate to the "Recovery mode" option.
• Press the Power button to select it.

Step 3: Access the Android Recovery Menu

• When you see the Android logo, hold the Power button and briefly press the Volume Up button once.
• This will bring up the Android Recovery menu.

Step 4: Perform the Factory Reset

• Use the Volume Down button to navigate to the option labeled "Wipe data/factory reset."
• Press the Power button to select this option.
• Confirm the selection by navigating to "Yes" and pressing the Power button again.
• Wait for the reset process to complete, which may take a few minutes.

Step 5: Reboot the Device

• Once the factory reset is finished, you will see the option to "Reboot system now."
• Ensure this option is highlighted and press the Power button to select it.
• Your Motorola phone will restart and be restored to its original factory settings.

Conclusion

You have successfully performed a factory reset on your locked Motorola phone. This process has erased all data and removed any locks you had set, allowing you to set up your device as new. Remember to back up any important data in the future to avoid loss when performing resets. If you encounter any issues, consider consulting the user manual or support resources for further assistance.