🛑 How to Build a PC 🛑 Step By Step Ryzen & Intel 🛑 How To Build a Gaming PC

Introduction

Building a PC can be an exciting yet daunting task, especially for newcomers. This guide walks you through the entire process of building a gaming PC in 2025, using either AMD Ryzen or Intel components. Following these detailed steps will help you understand how to assemble your PC from start to finish, ensuring a smooth and successful build.

Step 1: Check Your PC Parts

• Gather all components:
  • CPU (Processor)
  • Motherboard
  • RAM (Memory)
  • GPU (Graphics Card)
  • PSU (Power Supply Unit)
  • Storage (SSD/HDD)
  • PC case
• Verify compatibility among parts to avoid issues during assembly.

Step 2: Gather Your Tools

• Prepare essential tools:
  • Magnetic flexible screwdriver
  • Velcro cable ties
  • Magnetic parts tray
  • Thermal paste (if not pre-applied)
  • Isopropyl alcohol for cleaning
  • Wire cutters and cheap pliers

Step 3: Prepare the Motherboard

• Unbox and place the motherboard on a non-static surface.
• Ensure you have access to the socket and RAM slots.

Step 4: Install the CPU

• Carefully align the CPU with the socket on the motherboard.
• Gently place the CPU into the socket without forcing it.

Step 5: Install the CPU Cooler

• Attach the CPU cooler according to the manufacturer’s instructions.
• Ensure it is securely fastened to prevent overheating.

Step 6: Apply Thermal Paste

• If necessary, apply a small amount of thermal paste on the CPU before installing the cooler.
• Use a spreader to create an even layer.

Step 7: Install RAM

• Insert RAM sticks into the appropriate slots, ensuring they click into place.
• Follow the motherboard's manual for the correct slot order.

Step 8: Install M.2 SSD

• Locate the M.2 slot on the motherboard.
• Insert the M.2 SSD at an angle and secure it with a screw.

Step 9: Prepare the PC Case

• Open the case and remove any pre-installed components that may obstruct the build.
• Install standoffs for the motherboard if not pre-installed.

Step 10: Route EPS Cables

• Manage the EPS power cables from the PSU to the motherboard.
• Keep cables organized for better airflow and cleaner aesthetics.

Step 11: Install Motherboard in Case

• Align the motherboard with the standoffs and secure it using screws.
• Ensure all ports are accessible from the back panel.

Step 12: Install PSU

• Place the PSU in its designated area within the case.
• Secure it with screws and route the necessary power cables.

Step 13: Route GPU PCIe Cables

• Prepare the PCIe power cables for the GPU.
• Ensure they are long enough to reach the GPU once installed.

Step 14: Connect and Route Cables

• Connect all necessary cables:
  • Power cables to the motherboard and components
  • Data cables for storage drives
  • Front panel connections (power/reset buttons)
• Organize cables for a tidy setup.

Step 15: Install Additional Storage

• For 2.5” SSDs and 3.5” HDDs, follow the manufacturer’s instructions for mounting.
• Connect them to the motherboard and PSU.

Step 16: Install GPU and PCIe Cards

• Slot the GPU into the appropriate PCIe slot.
• Secure it with screws and connect any necessary power cables.

Step 17: Test the System

• Power on the system to check if it posts successfully.
• Ensure all components are functioning and visible in the BIOS.

Step 18: Final Cable Management

• Reassess cable management for improved airflow and aesthetics.
• Use cable ties to secure any loose cables.

Step 19: BIOS Flashback

• If needed, perform a BIOS flashback to ensure the motherboard is updated.
• Follow the instructions in the motherboard manual for this process.

Conclusion

Congratulations on building your gaming PC! Ensure all components are working correctly and perform any necessary updates. For further setup guidance, refer to the follow-up video on how to set up your PC after the build. Enjoy your new gaming experience!