The Ultimate Sieving & Ore Automation Setup | All The Mods 9 To The Sky

Introduction

In this tutorial, we will build the ultimate sieving and ore automation setup in Minecraft's All The Mods 9 To The Sky. This setup will enable you to automate the process of crushing ores, sieving materials, and crafting them into ingots with minimal effort. By the end, you will have a comprehensive understanding of how to utilize various logistic mods like modular routers and laser systems to achieve efficient resource management.

Chapter 1: Auto Hammer Setup

1. Build the Base Layer

   • Start with a rectangular base next to your starter base.
   • Add a second layer above the base for better fluid management.

2. Install Drawers

   • Place down drawers for storing crushed materials.
   • Organize them for four base materials (Deep Slate, Blackstone, Stone, Netherrack) and three dust types (Gravel, Sand, Dust).

3. Set Up Flux Hammers

   • Place flux hammers facing the drawers, ensuring the open side connects to storage.
   • Use two hammers for gravel to sand and dust conversions.

4. Create a Water Source

   • Dig a 3-block wide hole on one side for a source of witch water.
   • Use melium grass seeds from dirt to create melium, which will help produce soul sand.

5. Connect Hammers to Drawers

   • Use modular routers with distributor modules to transport crushed materials to the appropriate drawers.
   • Add speed and stack upgrades to enhance processing efficiency.

Chapter 2: Sieving and Filtering

1. Setup Sieving System

   • Place two chests for input/output of items.
   • Add a void upgrade to avoid clutter from pebbles.
   • Install a flux sieve with a netherite mesh and netherite upgrade.

2. Transfer Crushed Materials

   • Connect crushed materials to the sieve using a modular router with a distributor module.
   • Ensure the router is set to pull items from the storage drawers.

3. Configure Filters in Crafters

   • Place two ore crafters to handle different chunk recipes.
   • Use filter modules to separate recipes for iron, copper, gold, etc.
   • Ensure each crafter has a speed mode set to fast.

Chapter 3: Ore Miner Setup

1. Setup Modular Routers

   • Create 15 modular routers with placer modules for placing blocks.
   • Set each router to drop blocks in the desired direction.

2. Connect Items to Storage

   • Use a storage controller with double oak drawers for efficient item management.
   • Add filters to prevent unwanted items from clogging the system.

3. Install a Player Simulator

   • Use a player simulator with a pickaxe to mine ores automatically.
   • Ensure the simulator is set to left-click to break blocks efficiently.

4. Organize Storage for Raw Ores

   • Set up additional drawers for raw materials like fluoride, sulfur, and appetite to keep your storage organized.

Chapter 4: Ore Crushing with Occultism

1. Create Crushers

   • Use occultism crushers for efficient ore processing.
   • Set up six crushers to maximize output and place them strategically.

2. Connect to Storage

   • Install storage controllers and drawers to manage dust produced by the crushers.
   • Lock drawers for materials you want to keep, like appetite dust.

3. Set Up XNET for Logistics

   • Install XNET controllers to manage item flow efficiently.
   • Use item cards to set input and output parameters for your machines.

4. Integrate with LaserIO

   • Use laser nodes to connect to your netherite furnace for smelting operations.
   • Configure item cards and filters to manage dust and ingots effectively.

Conclusion

By following this guide, you have created a fully automated sieving and ore processing setup in Minecraft. This system allows you to produce large quantities of ores and ingots while minimizing manual labor. Consider expanding your setup by adding more crushers or upgrading your machines for even greater efficiency. Enjoy your automated mining experience!