Cara Setting Access Point TP-Link TL-WA701ND || Konfigurasi Dasar Wireless Access Point WAP

Introduction

This tutorial will guide you through the basic setup and configuration of the TP-Link TL-WA701ND Wireless Access Point. Understanding how to properly configure an access point can greatly enhance your network's reach and capacity, allowing more devices to connect seamlessly.

Step 1: Understanding Access Points and Their Benefits

Before setting up your access point, it’s important to understand what it does and how it differs from a router.

• Definition of Access Point: An access point (AP) is a device that allows other devices to connect to a wired network wirelessly. It extends the coverage of your existing network.
• Benefits of Using an Access Point:
  • Can be installed wherever an Ethernet cable is accessible.
  • Newer models support Power over Ethernet (PoE+), eliminating the need for separate power outlets.
  • Offers features like Captive Portals and Access Control Lists (ACL) for managing guest access.
  • Allows centralized management of multiple access points by network administrators.

Step 2: Preparing the Hardware

Ensure you have the following ready before starting the setup:

• TP-Link TL-WA701ND access point.
• Ethernet cable.
• Power source (if not using PoE).
• A computer or mobile device to access the configuration interface.

Step 3: Connecting the Access Point

Follow these steps to physically connect your access point:

1. Connect the Ethernet Cable:

   • Plug one end of the Ethernet cable into one of the LAN ports on your router.
   • Connect the other end to the Ethernet port on the TP-Link TL-WA701ND.

2. Powering the Device:

   • If you are not using PoE, connect the power adapter to the access point and plug it into a power outlet.

Step 4: Accessing the Configuration Interface

To configure the access point, you need to access its web interface:

1. Connect to the Access Point:

   • On your computer or mobile device, connect to the default Wi-Fi network of the TP-Link access point (usually labeled as "TP-LINK_XXXX").

2. Open a Web Browser:

   • In the address bar, type the default IP address of the access point, which is typically 192.168.1.1 or 192.168.0.1, and press Enter.

3. Log In to the Interface:

   • Enter the default username and password (usually both are "admin") to log into the settings.

Step 5: Configuring Basic Settings

Once logged in, you can set up your access point:

1. Change the Default SSID:

   • Navigate to the "Wireless" settings.
   • Change the SSID (network name) to something unique to distinguish it from other networks.

2. Set the Wireless Security:

   • Select the security mode (preferably WPA2-PSK).
   • Create a strong password to secure your network.

3. Adjust Additional Settings:

   • You can configure other settings, such as channel selection, transmit power, and MAC filtering based on your requirements.

4. Save Changes:

   • Make sure to save your settings before exiting.

Step 6: Testing the Connection

After configuration, test the access point:

1. Disconnect and Reconnect:

   • Disconnect your computer from the default network.
   • Search for the new SSID you created and connect using the password.

2. Check Connectivity:

   • Ensure that you can access the internet and that the signal strength is adequate in various locations.

Conclusion

Configuring your TP-Link TL-WA701ND access point is a straightforward process that can significantly enhance your network's capabilities. Always remember to secure your network with strong passwords and keep your firmware updated for optimal performance. If you need to expand your network further, consider adding additional access points and managing them centrally for a more robust wireless solution.