Maintenance Guide - Dyson Ball Animal 3 UP30 (Filter Change, Brushroll Clean, Clearing a Clog)

Introduction

This tutorial provides a comprehensive guide to maintaining your Dyson Ball Animal 3 vacuum. We'll cover essential tasks such as changing filters, cleaning the brush roll, and clearing any clogs. Regular maintenance ensures optimal performance and extends the lifespan of your vacuum.

Step 1: Changing the Filters

To maintain your Dyson Ball Animal 3, it's crucial to change the filters regularly.

1. Locate the Filters

   • There are two filters: a pre-filter and a post-filter.
   • The pre-filter is found near the ball, while the post-filter is located under the top cover of the vacuum.

2. Remove the Filters

   • For the pre-filter, twist it counterclockwise to remove.
   • For the post-filter, lift the top cover and pull the filter out.

3. Clean or Replace the Filters

   • If cleaning, rinse the filters under cold water until the water runs clear. Allow them to dry completely (approximately 24 hours).
   • If replacing, purchase genuine Dyson filters or aftermarket filters, such as the Lemige 2 Pack.

4. Reinstall the Filters

   • Once dry or with new filters, insert the pre-filter and twist it clockwise to secure.
   • Place the post-filter back in and close the top cover.

Step 2: Cleaning the Brush Roll

A clean brush roll is essential for effective suction and cleaning.

1. Remove the Brush Roll

   • Locate the brush roll cover at the bottom of the vacuum.
   • Unscrew the cover using a screwdriver and lift it off.

2. Inspect and Clean the Brush Roll

   • Check for hair or debris wrapped around the brush roll.
   • Use scissors to carefully cut away any tangled hair or fibers.

3. Reinstall the Brush Roll

   • Once cleaned, place the brush roll back into its housing.
   • Secure the cover by screwing it back in place.

Step 3: Clearing a Clog

If your vacuum is losing suction, it may have a clog that needs to be cleared.

1. Identify Potential Clogs

   • Check the hose, wand, and any other attachment points for blockages.

2. Remove and Inspect the Hose

   • Detach the hose from the vacuum.
   • Look for any visible clogs or debris.

3. Clear the Clog

   • If you find a blockage, use a long object (like a broomstick) to gently push it out.
   • If necessary, rinse the hose with water and allow it to dry completely before reattaching.

4. Reattach the Hose

   • Once cleared and dry, securely reattach the hose to the vacuum.

Conclusion

Regular maintenance of your Dyson Ball Animal 3—including changing filters, cleaning the brush roll, and clearing clogs—will ensure its efficiency and longevity. Make these tasks a part of your cleaning routine to keep your vacuum operating at its best. For genuine and aftermarket parts, visit the provided links for easy access.