How to Cut Vinyl Fence to FIT Narrow Sections | Cutting Vinyl Fence to Size

Introduction

This tutorial provides a step-by-step guide on how to cut vinyl fence sections to fit narrower spaces. Often during installation, you may encounter areas where a full panel won't fit, requiring you to cut the vinyl to size. This guide will help you achieve a clean and precise cut, ensuring your vinyl fence looks professional.

Step 1: Gather Your Tools

Before starting, ensure you have the following tools at hand:

• SkilSaw (or similar saw)
• 6 1/2" vinyl cutting blade
• Milwaukee drill kit
• Masking tape
• Tape measure

Having the right tools is essential for a successful and safe project.

Step 2: Measure the Space

1. Use your tape measure to determine the exact width needed for the vinyl fence section.
2. Mark the measurement on the vinyl fence using masking tape. This will provide a clear guide for cutting.

Tip: Always measure twice to avoid mistakes.

Step 3: Prepare for Cutting

1. Secure the vinyl fence in a stable position to prevent movement while cutting.
2. Adjust the saw blade to the appropriate depth for cutting through the vinyl material.

Safety Tip: Always wear safety goggles and a mask to protect yourself from debris.

Step 4: Cut the Vinyl Fence

1. Align the saw with the tape mark on the vinyl fence.
2. Begin cutting slowly and steadily, following the marked line.
3. Keep your hands clear of the blade and maintain a firm grip on the saw.

Common Pitfall: Rushing the cut may lead to jagged edges. Take your time for a clean cut.

Step 5: Smooth the Edges

1. After cutting, check the edges for any rough spots.
2. Use sandpaper or a file to smooth any jagged edges for a professional finish.

Tip: A smooth edge will not only look better but also prevent potential snagging or injury.

Step 6: Install the Cut Vinyl Fence

1. Position the cut section into place within your fence layout.
2. Secure the vinyl fence as per standard installation practices, ensuring it is level and aligned.

Ensure you follow any local building codes during installation.

Conclusion

Cutting vinyl fence to fit narrower sections is a straightforward process when you follow these steps. By measuring accurately, using the right tools, and cutting carefully, you can achieve a professional-looking installation. If you're planning to install the entire fence, consider watching the full installation tutorial linked in the video description for more guidance. Happy fencing!