How to perform an oil change on a 2022 Mitsubishi Eclipse Cross 1.5L TURBO
2 min read
6 months ago
Published on Apr 21, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Perform an Oil Change on a 2022 Mitsubishi Eclipse Cross
Materials Needed:
- 10mm socket wrench
- Pliers
- Oil filter pliers
- OEM Mitsubishi oil filter
- 4.5 quarts of oil
- Ramps
- Oil drain pan
Step 1: Prepare for the Oil Change
- Gather all the necessary materials and tools listed above.
- Drive the car onto ramps to elevate the front of the vehicle for easier access to the oil drain bolt.
Step 2: Drain the Old Oil
- Remove the oil fill cap and set it aside.
- Locate the oil filter underneath the vehicle and the oil drain bolt just behind it.
- Use oil filter pliers to loosen and remove the oil filter.
- Wrap a glove around the oil filter to prevent oil spillage.
- Remove the old Crush Washer from the drain plug using pliers.
- Unscrew the drain bolt and let the old oil drain into the oil pan.
Step 3: Replace the Oil Filter and Crush Washer
- Install a new Crush Washer on the drain plug.
- Install the new oil filter by peeling off the covering and lubricating the gasket.
- Tighten the oil filter using the oil filter pliers.
Step 4: Refill with New Oil
- Use a measuring funnel to pour 4.5 quarts of new oil into the engine.
- Wipe down any spilled oil with a rag and brake cleaner to ensure a clean surface.
Step 5: Final Steps
- Remove the funnel and catch any oil drips with paper towels.
- Reinstall the oil fill cap securely.
- Reset the oil change indicator on the vehicle according to the manufacturer's recommendations.
- Follow the recommended oil change intervals for your driving conditions.
Conclusion:
By following these steps, you have successfully performed an oil change on a 2022 Mitsubishi Eclipse Cross. Remember to dispose of the old oil properly and safely. Thank you for watching and maintaining your vehicle's engine health.