Restoring a Harley-Davidson FXR Fairing Pt.3

Tutorial: Restoring a Harley-Davidson FXR Fairing

Step 1: Patching and Preparing the Fairing

1. Start by using a two-in-one epoxy filler by 3M to patch up any scraped or damaged areas on the fairing.
2. Sand the filler down until it blends seamlessly with the rest of the plastic surface.
3. Feather out the repaired areas to ensure a smooth finish.
4. Clean up any road rash or torn-up sections on the fairing by sealing and filling them with the epoxy filler.
5. Sand down the repaired areas until they feel smooth to the touch.

Step 2: Priming and Painting the Fairing

1. Scuff up the entire fairing surface to prepare it for primer.
2. Apply a proper painter's primer with activator to fill in any small divots or cracks on the fairing.
3. Sand down the primed surface to ensure a smooth finish.
4. Use pin striping tape to mask off any areas that need to retain the original pin stripes.
5. Apply primer to the fairing, covering both the repaired areas and the entire surface.
6. Sand down the primered surface to further smooth out any imperfections.
7. Choose a final color for the fairing and apply it over the primered surface.
8. Use clear coat to seal and protect the painted surface.

Step 3: Final Touches and Assembly

1. Scuff up the inside portion of the fairing to prepare it for assembly.
2. Ensure that all areas, including the inside and outside of the fairing, are scuffed and prepped for painting.
3. Touch up any remaining spots or scratches on the fairing before final assembly.
4. Reassemble the fairing with all its components, such as the headlight mount, clusters, speakers, and vents.
5. Clean up any remaining blemishes or imperfections for a polished finish.
6. Check the gaskets and other components for any necessary replacements or repairs.
7. Once the fairing is fully restored, admire the finished look and ensure everything is securely in place.

By following these steps, you can successfully restore a Harley-Davidson FXR fairing to its original condition, ready to be reinstalled on your bike.