BMS Part 9 Fire fighting system with BMS

Introduction

This tutorial guides you through the integration of a fire fighting system with a Building Management System (BMS). It covers the connection of various components, including fire fighting tanks, pumps, gas systems, irrigation pumps, and fire alarm panels. Understanding this integration is essential for maintaining safety and ensuring efficient operation in buildings.

Step 1: Connect the Fire Fighting Tank

• Identify the location of the fire fighting tank within your facility.
• Ensure the tank is filled with water and properly pressurized.
• Connect the tank to the BMS using the appropriate sensors and controls:
  • Use level sensors to monitor the water level.
  • Connect pressure sensors to ensure the system is operating within safe parameters.
• Verify the connections by testing the sensors through the BMS interface.

Step 2: Integrate Fire Fighting Pumps

• Locate the fire fighting pumps that will be used for water supply.
• Connect the pumps to the BMS for monitoring and control:
  • Use flow sensors to monitor the water output.
  • Connect the pumps to the BMS control system for remote operation.
• Test the pumps using the BMS to ensure proper functionality and responsiveness.

Step 3: Set Up the Gas System

• Identify the gas system components that require integration.
• Connect gas detection sensors to the BMS:
  • Ensure sensors are placed in strategic locations for accurate detection.
  • Link alarms to the BMS for real-time alerts.
• Conduct functionality tests to ensure timely alerts and system responsiveness.

Step 4: Connect Irrigation and Transfer Water Pumps

• Identify the irrigation and transfer water pumps in your facility.
• Connect these pumps to the BMS for coordinated control:
  • Use moisture sensors for irrigation control to optimize water usage.
  • Link transfer pumps to facilitate water flow between tanks.
• Test the system by simulating conditions that would require the pumps to activate.

Step 5: Integrate the Elevator System

• Connect the elevator system to the BMS to enhance safety during emergencies.
• Ensure the BMS can control the elevator's operation in conjunction with fire alarms:
  • Set up protocols for elevator recall in the event of a fire alarm.
• Test the integration by triggering a fire alarm and observing the elevator's response.

Step 6: Link the Fire Alarm Panel

• Connect the fire alarm panel to the BMS.
• Ensure that the BMS receives signals from the fire alarm system:
  • Link alarm notifications to the BMS interface for real-time monitoring.
  • Set up automated responses, such as triggering pumps or alerts, upon alarm activation.
• Test the system by conducting a fire drill to verify the alarm triggers the BMS correctly.

Conclusion

Integrating a fire fighting system with a Building Management System is crucial for enhancing safety and operational efficiency. By following these steps, you will ensure that all components are connected and functioning properly. After completing the integration, consider conducting regular system tests and drills to maintain readiness in case of an emergency.