How to Replace Your Nintendo Switch Joy Con Controller Battery

Introduction

This tutorial provides a comprehensive guide on how to replace the battery in your Nintendo Switch Joy-Con controllers. Replacing a Joy-Con battery can enhance the controller's performance and extend its lifespan. By following the steps outlined here, you'll be able to complete the replacement with the necessary tools and confidence.

Step 1: Gather Necessary Tools and Materials

Before starting the battery replacement, ensure you have the following items:

• NewPower99 Battery Replacement Kit (includes a high-capacity battery and special tools)
• Small Phillips screwdriver
• Tweezers
• Plastic opening tool or spudger
• ESD-safe wrist strap (optional for safety)

Tip: Ensure your workspace is clean and organized to avoid losing any small screws or components.

Step 2: Prepare Your Work Area

• Find a well-lit area to work on your Joy-Con.
• Make sure you have a soft surface to prevent scratches.

Step 3: Remove the Joy-Con from the Console

• Slide the Joy-Con controller off the Nintendo Switch console.
• Ensure the console is powered off to avoid any electrical issues.

Step 4: Open the Joy-Con Case

• Locate the screws on the back of the Joy-Con.
• Use the small Phillips screwdriver to remove the screws. There are four screws to take out.
• Carefully use the plastic opening tool to pry open the Joy-Con casing. Start from the edge and work your way around to avoid damaging the clips.

Step 5: Disconnect the Battery

• Once the Joy-Con is open, locate the battery connector.
• Gently lift the connector using tweezers or the plastic opening tool. Be careful not to pull on the wires.

Step 6: Remove the Old Battery

• Take out the old battery from the Joy-Con casing.
• Dispose of the old battery properly according to local regulations.

Step 7: Install the New Battery

• Place the new battery into the Joy-Con casing.
• Connect the battery by pressing the connector back into place securely.

Step 8: Reassemble the Joy-Con

• Align the Joy-Con casing pieces and press them together gently.
• Reinsert the screws you removed earlier to secure the casing.

Step 9: Test the Joy-Con

• Slide the Joy-Con back onto the Nintendo Switch console.
• Power on the console and test the Joy-Con to ensure it’s functioning properly.

Conclusion

You have successfully replaced the battery in your Nintendo Switch Joy-Con controller! Regular maintenance can keep your controllers in optimal condition. If you encounter any issues, revisit the steps or consult the Battery Installation Video included in your replacement kit. Happy gaming!