Vivaro Trafic clutch bleeding NO SPECIAL TOOLS

Introduction

This tutorial provides a straightforward method for bleeding the clutch on a Vivaro Trafic without the need for special tools. Properly bleeding the clutch system is essential for ensuring smooth operation and responsiveness. Follow these steps to successfully complete the process.

Step 1: Gather Your Materials

Before starting, ensure you have the following items ready:

• Brake fluid (check your vehicle manual for the correct type)
• A clear plastic tube
• A container to catch old fluid
• A wrench or socket (usually 10mm)
• An assistant (optional, but helpful)

Step 2: Locate the Bleed Valve

• The bleed valve is typically located on the slave cylinder of the clutch.
• In the Vivaro Trafic, it’s usually found near the gearbox.
• Make sure the vehicle is securely parked and the engine is off.

Step 3: Prepare the Vehicle

• Ensure the clutch fluid reservoir is filled with fresh brake fluid.
• Check for any leaks around the clutch system.

Step 4: Attach the Tube

• Slide one end of the clear plastic tube over the bleed valve.
• Place the other end into the container to catch fluid.

Step 5: Bleed the Clutch

• If you have an assistant:
  1. Have them pump the clutch pedal several times.
  2. Instruct them to hold the pedal down.
  3. Open the bleed valve slightly with your wrench to release air and fluid.
  4. Close the valve before they release the pedal.
  5. Repeat this process until no air bubbles appear in the fluid being expelled.
• If you are working alone:
  1. Pump the clutch pedal and hold it down.
  2. Open the bleed valve to release air, then close it before releasing the pedal.
  3. Repeat until the fluid runs clear without bubbles.

Step 6: Check Fluid Levels

• After bleeding, check the fluid level in the reservoir.
• Top up with brake fluid as necessary to prevent air from re-entering the system.

Step 7: Test the Clutch

• Start the vehicle and press the clutch pedal several times to ensure it feels firm and responsive.
• Take the vehicle for a short test drive to confirm the clutch is functioning properly.

Conclusion

You have now successfully bled the clutch on your Vivaro Trafic without any special tools. Regular maintenance of your clutch system is important for vehicle performance. If you encounter any issues, consider consulting a professional mechanic. Happy driving!