How to replace Samsung refrigerator main control board part # DA92-00384L

Introduction

This tutorial provides detailed, step-by-step instructions on how to replace the main control board (part # DA92-00384L) in a Samsung French door refrigerator. The guidance here is applicable to various Samsung refrigerator models. If your refrigerator is not functioning correctly, replacing the control board may resolve the issue.

Step 1: Gather Necessary Tools and Parts

Before starting the replacement process, ensure you have the following tools and parts ready:

• Tools Required:

  • Philips screwdriver

• Parts Needed:

  • Main control board (part # DA92-00384L or compatible part numbers: 4931169, AP5986655, PS11729045, EAP11729045)

You can purchase the control board from Parts Dr.

Step 2: Unplug the Refrigerator

To ensure safety while working on the control board:

• Locate the refrigerator's power cord.
• Unplug the refrigerator from the electrical outlet. This prevents any risk of electric shock and protects the appliance.

Step 3: Access the Control Board

The control board is often located at the back of the refrigerator. Follow these steps to access it:

• Move the refrigerator away from the wall to access the back panel.
• Use the Philips screwdriver to remove screws securing the back panel.
• Carefully take off the back panel to expose the control board.

Step 4: Remove the Old Control Board

Once you have access to the control board:

• Locate the control board assembly.
• Disconnect the wiring harnesses by gently pulling them off the connectors.
• Remove any screws or clips holding the control board in place.
• Carefully take out the old control board and set it aside.

Step 5: Install the New Control Board

Now it's time to install the new control board:

• Position the new control board in the same location as the old one.
• Secure the control board using screws or clips that were removed earlier.
• Reconnect the wiring harnesses to their respective connectors.

Step 6: Reattach the Back Panel

After installing the new control board:

• Place the back panel back onto the refrigerator.
• Use the Philips screwdriver to secure the panel with screws.
• Ensure that the panel is properly aligned and fitted.

Step 7: Plug in the Refrigerator

Once everything is reassembled:

• Plug the refrigerator back into the electrical outlet.
• Check if the refrigerator powers on and functions properly.

Conclusion

Congratulations, you have successfully replaced the main control board in your Samsung refrigerator! Make sure to monitor the appliance for any irregularities. If you encounter further issues, consider consulting a professional or checking the repair forum at Parts Dr. Regular maintenance can prolong the life of your appliance, so stay proactive about repairs and upkeep.