2011 Nissan Murano CVT Transmission fluid drain and fill.

Introduction

This tutorial provides a step-by-step guide for draining and filling the CVT transmission fluid in a 2011 Nissan Murano. Regular maintenance of the transmission fluid is crucial for optimal vehicle performance and longevity. This guide is especially useful for those who prefer performing their own vehicle maintenance.

Step 1: Gather Necessary Tools and Materials

Before starting the fluid change, ensure you have the following tools and materials on hand:

• 10mm hex socket
• Drain pan
• Funnel
• New Nissan NS-2 CVT fluid (approximately 5 quarts)
• Rags for cleanup
• Measuring container (optional)

Step 2: Locate the Drain Plug

• Position your vehicle on a flat surface and secure it with wheel chocks.
• Raise the vehicle using a jack and support it with jack stands if necessary.
• Locate the CVT transmission drain plug on the bottom of the transmission.

Step 3: Drain the Old Fluid

• Using the 10mm hex socket, carefully remove the drain plug.
• Allow the old transmission fluid to fully drain into the drain pan. This may take a few minutes.
• Measure the amount of fluid that was drained. In this case, approximately 4.5 quarts were removed.

Step 4: Replace the Drain Plug

• Once the fluid has completely drained, clean the drain plug and its surrounding area.
• Reinstall the drain plug securely to prevent leaks.

Step 5: Add New Transmission Fluid

• Using a funnel, pour in approximately 4 quarts and 14 ounces of new Nissan NS-2 CVT fluid. This should bring the fluid level to the full mark after a test drive and re-check.
• To ensure accuracy, you can use a measuring container while pouring.

Step 6: Check Fluid Level

• Start the engine and let it run for a few minutes.
• After warming up, shift through all the gears to circulate the new fluid.
• Turn off the engine and let it sit for a minute.
• Recheck the fluid level using the dipstick and add more fluid if necessary to reach the full mark.

Conclusion

You've successfully drained and filled the CVT transmission fluid in your 2011 Nissan Murano. Regularly changing the transmission fluid can enhance vehicle performance and extend the life of the transmission. For future maintenance, consider checking the fluid level every 30,000 miles or as recommended in your vehicle's manual. If you have any concerns or notice issues during the process, consult a professional mechanic.