FIXED in 3 STEPS! | NO Paint NO Filler!

Introduction

This tutorial provides a step-by-step guide on how to remove minor dings and dents from vehicle bodywork using the paintless dent removal method. This technique is effective and avoids the need for paint or filler, restoring your car's appearance with skill and precision.

Step 1: Gather Your Tools

Before you start, ensure you have the following tools and equipment ready:

• Glue Remover (99.9% Isopropyl Alcohol Liquid Cleaner)
• Bosch or Portable Glue Gun
• Dewalt Heat Gun
• Infrared Temperature Gun
• PDR Tools such as:
  • 24” Softtip Double Bend
  • A44 7/16" 6-pc tip set and tip holder
  • Aluminium Knock Down

Health and Safety Gear

Make sure to wear the following for safety:

• Ear Plugs
• Safety Gloves
• Safety Glasses

Step 2: Assess the Damage

Examine the dent closely to determine the best approach for removal.

• Identify if the dent can be accessed from behind the panel or if you need to use glue pulling methods.
• Note the size and depth of the dent, as this influences the tools you will use.

Step 3: Prepare the Area

Clean the area around the dent thoroughly to ensure the glue adheres properly.

• Use the glue remover to clean the surface.
• Dry the area completely before proceeding.

Step 4: Apply Heat

Using a heat gun, gently warm the area around the dent. This helps the metal become more malleable.

• Keep the heat gun moving to avoid overheating any one spot.
• Use the infrared temperature gun to monitor the surface temperature, aiming for a warm but not too hot surface.

Step 5: Attach the Glue

Using your glue gun, apply a small amount of glue to the tip of your pulling tool.

• Quickly place the tool against the dent and let the glue set for the recommended time.
• Make sure the glue does not overflow onto the surrounding area.

Step 6: Pull the Dent

Once the glue has set, carefully pull the dent out.

• Use a steady and even force to avoid damaging the panel.
• If the dent does not pop out on the first attempt, reapply heat and try again.

Step 7: Finishing Touches

After the dent has been removed, clean off any remaining glue.

• Use the glue remover to dissolve the glue residue.
• Polish the area using a cutting compound and polishing mop to restore the finish.

Conclusion

You have successfully removed a dent using the paintless dent removal method. This technique is a skillful way to repair minor damages without the need for paint or filler. Remember to practice these steps to improve your technique, and consider investing in quality tools for better results. Happy repairing!