EASIEST WAY TO INSTALL REAR SHOCK HONDA CLICK GAME CHANGER WITHOUT REMOVING FAIRINGS

Introduction

This tutorial provides a straightforward guide on how to install a rear shock on a Honda Click without the need to remove the fairings. This method is efficient and saves time, making it a game changer for motorcycle maintenance enthusiasts.

Step 1: Gather Your Tools and Materials

Before beginning the installation, ensure you have the following tools ready:

• Socket wrench set
• Screwdrivers (Phillips and flathead)
• Torque wrench
• Replacement rear shock
• Safety gloves
• Clean cloths for wiping

Practical Tip

Make sure your motorcycle is parked on a level surface and is stable. Using a motorcycle stand can provide extra safety.

Step 2: Prepare Your Motorcycle

1. Turn Off the Engine: Ensure the motorcycle is completely off to avoid accidental starts.
2. Remove the Seat: Use the appropriate tool to unscrew and lift the seat off to access the rear shock area.
3. Inspect the Current Setup: Take a moment to check the existing rear shock for any signs of wear or damage.

Step 3: Access the Rear Shock

1. Locate the Shock Mounting Points: Identify where the rear shock attaches to the frame and swingarm.
2. Remove the Bolts: Use the socket wrench to carefully remove the bolts holding the old shock in place. Keep these bolts, as you will need them for the new shock.

Common Pitfall

Avoid stripping the bolt heads by ensuring your socket fits snugly and applying even pressure.

Step 4: Install the New Rear Shock

1. Position the New Shock: Align the new shock with the mounting points.
2. Insert Bolts: Hand-tighten the bolts to secure the new shock in place.
3. Torque the Bolts: Use a torque wrench to tighten the bolts to the manufacturer's specifications.

Practical Tip

Refer to the motorcycle's service manual for the correct torque settings.

Step 5: Reassemble the Motorcycle

1. Replace the Seat: Secure the seat back in place, ensuring it clicks into position.
2. Clean Up: Wipe any fingerprints or debris from the motorcycle, especially around the newly installed shock.

Conclusion

You have successfully installed a rear shock on your Honda Click without removing the fairings. This method not only saves time but also keeps the integrity of your motorcycle's appearance. Regularly check the new shock for any signs of wear, and don’t hesitate to consult a professional if you encounter any issues. Happy riding!