MK6 VW Jetta How to Change Front Brakes, Pads & Rotors - MKVI (2011-2018)
2 min read
9 months ago
Published on Apr 29, 2024
This response is partially generated with the help of AI. It may contain inaccuracies.
Table of Contents
How to Change Front Brakes, Pads & Rotors on MK6 VW Jetta (2011-2018)
If you're looking to change the front brakes, pads, and rotors on your MK6 VW Jetta, follow these step-by-step instructions based on the closed captions of the video from the Best Hombre channel.
Materials Needed:
- Octagonal wrenches
- Bungee cord or zip ties
- Steel pipe (for leverage)
- Grease
Step 1: Safety Precautions
- Stand in front of the vehicle and stick a bungee cord underneath for safety.
- Remove the retainer spring and two caps to access the pads.
Step 2: Removing the Caliper
- Use octagonal wrenches to remove the bolts holding the pads.
- Take off the caliper guide using appropriate tools.
- Use a steel pipe for leverage if dealing with rusted bolts.
Step 3: Replacing Pads and Rotors
- Carefully remove the old pads from the caliper, ensuring not to damage the rubber.
- Install the new pads with the clips facing towards the inside of the caliper.
- Clean and grease the caliper before putting it back in place.
Step 4: Final Steps
- Tighten the caliper and pads in place.
- Secure the caps and clips back on.
- Put the wheel back on and tighten the bolts.
- Repeat the same process for the other side of the vehicle.
By following these steps, you should be able to successfully change the front brakes, pads, and rotors on your MK6 VW Jetta. Remember to take necessary safety precautions and consult a professional if needed.